Chapin Poly Foamer 2 Gallon (2659E) - Questions & Answers

Displaying 1 to 8 (of 8 questions)
Sort:
  • Asked by Marion
    07/14/2010
    Q
    I can't get the Chapin Poly Foamer #2659 and Profoam foaming concentrate to foam.
    I mixed 1/2 gal of warm water to 1 1/2 cups Timbor to 1 1/2 oz. Profoam foaming concentrate.
    A
    We have never had an issue with the Chapin Poly Foamer (#2659) not foaming. Did you shake up the foamer vigorously after mixing everything in the foamer? You need to shake it to activate the foaming solution.  Also, since you are using a powder which is harder to mix sometimes it is usually recommended to mix the powder and water in a separate container first, such as a bucket, and then pour it in the foamer with the solution and shake well to activate. You may want to add a little more foaming solution also.
    Was this answer helpful to you?   Yes No
    3 of 4 people found this answer helpful.
  • Asked by Darrell
    08/10/2010
    Q
    Can I use a different brand of foaming agent in the Chapin Poly foamer?
    A
    You can use any brand of foaming agent as long as it is a foaming agent. We just happen to carry ProFoam Platinum.
    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Dan
    04/05/2010
    Q
    How does the Chapin Poly Foamer work compared to other regular sprayers?
    Do you have a detail part list with pictures? Can you send me a copy? How does it make foam? How big is the nozzle injecting the foam?
    A
    Poly Foamers have a special nozzle and pump inside that can apply foam applications.  Any of the foamers we sell, including the Chapin Poly Foamer can be used as normal sprayers also.  However, normal hand pump sprayers cannot apply foam.  You must also use a foaming agent along with the insecticide you are using.  We do not have a breakdown of the product, however you can call the manufacturer Chapin for further specific information.  They can be reached at 1-800-444-3140.
    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Kenneth from New Orleans, La
    06/05/2016
    Q
    Do you have replacement parts for the Chapin Poly Foamer?
    I bought the Chapin Poly Foamer product a couple years ago and lost the 2 foaming tips and little red broadcast spray nozzle. Can I purchase these replacement parts from D.M.O.P.C?
    A

    Yes, you can purchase replacement parts for the Chapin Poly Foamer from DMOPC.  Please give us a call at 866-581-7378 so that we can better assist you with obtaining the parts you need. 

    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Eric from 96783
    07/05/2013
    Q
    I need to replace the shut off/handle assembly. Which part do I get? thanks
    A
    We most certainly can assist you with ordering the Shut/Off assembly. Please check out our Chapin Part page to see if you can find what you are looking for to fit your sprayer. You can also, always contact us at 866-581-7378 and one of our customer service Reps will gladly assist you.
    Was this answer helpful to you?   Yes No
    0 of 1 people found this answer helpful.
  • Asked by Jim from San Diego, Ca
    07/23/2013
    Q
    Detailed instructions on Poly Foamer
    Is there a detailed set of instructions for the Poly Foamer with ProFoam? (perhaps with Bora-Care as well) Does one shake the mix in the Poly Foamer before or after pressurizing it? How much do I pump it? Is there a slug of unfoamed fluid which leaves the nozzle when the batch is first sprayed? Can I do less than the capacity of the Poly Foamer? Can I release the pressure on the sprayer or will foam be vented? Can I store the mixer with the ProFoam agent or does it degrade? CJust experiment and find out? Thank you!
    A
    Yes, please call Chapin at 800-444-3140 so that they can answer your specific questions as well as directly send you any information you need about the Chapin Polyfoamer.
    Was this answer helpful to you?   Yes No
    0 of 5 people found this answer helpful.
  • Asked by Jay from Destin, Fl
    01/08/2019
    Q
    What is the proper adjustable poly cone nozzle for a Chapin Poly Foamer 2 Gallon ( 2659E)?
    A
    Was this answer helpful to you?   Yes No
    0 of 1 people found this answer helpful.
  • Asked by Customer
    10/03/2021
    Q
    How to measure in the Chapin Poly Foamer 2 Gallon (2659E)?
    I cant see the solution height due to the black container? Theres no transparency gauge. How do I see the liquid height? Do I measure in a separate container and then pour it in?
    A

    This foamer/sprayer can hold up to 2 gallons when spraying, and 1 gallon when using it is a foamer.  When foaming, you should fill the sprayer up halfway with the solution, add foaming agent, and then shake well to activate the foam. Or yes, you can measure out in separate container and fill the sprayer.

    Was this answer helpful to you?   Yes No
Displaying 1 to 8 (of 8 questions)