Demon Max

Demon Max is no longer available. As an alternative, we recomend Demon WP.


 Demon Max Label
 Demon Max MSDS

Active Ingredient:	Cypermethrin, 25.3%
Target pests:	Subterranean termites (including eastern subterranean, western subterranean, desert termite, and Formosan subterranean termite), and when applied to wood, may be used for spot treatment of drywood termites.
For use in:	Outdoor surfaces and around buildings, hallow masonry units, crawl spaces, basements, under slabs, foundations, posts, poles, wooden constructions, food-handling establishments
Pet safe:	Yes; when used as directed
Yield:	1 pint yields approx. 32 gallons (varies according to emulsion concentration)
NOT FOR SALE TO:	NY, CT
Manufactured by:	Syngenta

With nearly twenty years of results, Demon MAX has become an industry mainstay in termite and lawn pest control. Kills and repels over 20 different pests including termites.

1. Now a broader label than the original Demon EC
2. Low concentration of active ingredient cypermethrin
3. Ultimate in long residual for protection that lasts up to 10 years in the soil
4. Reduced environmental impact
5. Low water solubility, does not leach into water supplies
6. Virtually odorless

USE DIRECTIONS
Apply a 0.25%-0.50% emulsion to establish subsurface termite control barriers as specified on product labeling. Avoid contamination of public and private water supplies by followingthese precautions:
1. Use anti-backflow equipment or procedures to prevent siphonage of pesticide back into water supplies.
2. Do not treat soil beneath structures that contain wells or cisterns.
3. Care must be taken to avoid runoff. Do not treat soil that is water-saturated or frozen. Do not treat while precipitation is occurring.
4. Care should be taken that the treatment solution is not introduced into the gravel and/or pipe drainage system which may be located on the exterior of the foundation in close proximity to the footing of the structure.

MIXING DIRECTIONS
Mix the termiticide in the following manner:
1. Fill tank 1/4 to 1/3 full with water.
2. Start pump to begin by-pass agitation and place end of treating tool in tank to allow circulation through hose.
3. Add appropriate amount of Demon Max.
4. Add remaining amount of water. 5. Let pump run and allow recirculation through the hose for 2-3 minutes.

There are no reviews for this product yet. Be the first.

		Question about this product? Ask our product experts...

There are no questions for this product yet. Be the first.