Joseph from Brunswick Georgia 31525 writes
To treat wood studs, you want to drill a 3/8 to 1/2 hole close to the top of the ceiling/stud on either side of the stud. Once the holes are in place on each side, inject the foam into each hole for 5-10 seconds, allowing the foam to expand but slide down the sides of the studs where they would travel. If you are seeing them along the baseboard areas, drill holes every 8-10 inches apart across the area between studs, about an inch or 2 above the baseboard. Use the same injection rate for each hole and let dry. It has some residual for about a month after it dissipates so if any are missed in the initial application the rest of the colony should be affected. If you know where an active infestation is, you should indeed direct treat with the Termidor Foam. The foam will only last for about 6 weeks because it is not bonding with soil molecules. An outside trench will need to be performed also. Please click on the article on how to perform your own termite treatment for additional information and tips. How to Perform Your Own Termite Treatment
Answer last updated on: 03/08/2014
