Hi - Yield 2, 4 - D Selective Weed Killer - Questions & Answers

Displaying 1 to 20 (of 320 questions)
Sort:
  • Asked by P from Montrose, Co
    06/07/2012
    Q
    What is the mixing ratio for Hi-Yield 2, 4-D Selective Weed Killer mixture?
    A
    The mixing ratios will vary according to where you are treating and what you are treating for. According to the Hi-Yield 2, 4-D Selective Weed Killer product label: For Spot treatment in non-crop areas: Use 1 pint in 3 gallons of water or 4 oz. in 3/4 gallon in a hand sprayer. In pastures and range land: Use 3 to 4 oz. in 1 to 3 gallons of water per 1,000 sq. ft. On Ornamental Turf: Use 16 oz. in 1 to 8 gallons of water per 2,725 sq. ft. or 2 gallons in 15 to 50 gallons per acre. Please review the product label for complete usage instructions.
    Was this answer helpful to you?   Yes No
    738 of 1120 people found this answer helpful.
  • Asked by Gene from Carlsbad Newmexico
    09/22/2014
    Q
    How long after use will rain impede effectiveness?
    A
    Hi-Yield 2, 4-D Selective Weed Killer is rainfast 4-6 hours after application.
    Was this answer helpful to you?   Yes No
    480 of 506 people found this answer helpful.
  • Asked by Phil from Edmond,oklahoma
    08/20/2013
    Q
    What is the ratio of Hi-Yield 2, 4-D Selective Weed Killer in two gallons water?
    A
    You can use 3 fl oz Hi-Yield 2, 4-D Selective Weed Killer in 2 gallons of water.
    Was this answer helpful to you?   Yes No
    387 of 416 people found this answer helpful.
  • Asked by Debra
    06/04/2011
    Q
    Is there an expiration date for Hi-Yield weed killer?
    A
    Insecticides and Herbicides do not have an expiration date.  Most all insecticides and herbicides are made to last for years and years on the shelf.  Most all will last at least 5 years as long as you keep the lid on tight and keep it out of direct sunlight and areas of high heat.  You should shake the bottle to prevent settling of active ingredients every few months to extend the life of the product in the bottle.
    Was this answer helpful to you?   Yes No
    304 of 317 people found this answer helpful.
  • Asked by Mitch from Wichita Falls Tx
    04/10/2012
    Q
    How long before I see results after treatment with Hi-Yield 2, 4-D Selective Weed Killer?
    A
    Depending on the age of the plant and the health of the plant it can take 2-4 weeks to see results after using Hi-Yield 2, 4-D Selective Weed Killer.
    Was this answer helpful to you?   Yes No
    269 of 293 people found this answer helpful.
  • Asked by Jacob from Ak
    03/29/2017
    Q
    How long do I need to wait before I can let my dog back out into my yard after I apply Hi-Yield 2,4-D Selective Weed Killer?
    A

    Pets and people need to be kept out of the area while Hi-Yield 2,4-D Selective Weed Killer is being applied and until everything is fully dry, which will take a few hours.

    Was this answer helpful to you?   Yes No
    260 of 286 people found this answer helpful.
  • Asked by Annette
    04/26/2011
    Q
    Is this weed killer considered a low drift?
    A
    2,4-D weed killer by Hi Yield is susceptible to wind drift and should not be used if winds exceed 15 mph.
    Was this answer helpful to you?   Yes No
    213 of 232 people found this answer helpful.
  • Asked by Sheryl from Blue Grass, Ia
    03/25/2012
    Q
    How long after treatment with Hi-Yield 2, 4-D Selective Weed Killer may pets return to sprayed area?
    A
    Pets can usually return to areas treated with Hi-Yield 2, 4-D Selective Weed Killer about 2 hours after the application. You want to be sure the treated areas are dry before the pets return.
    Was this answer helpful to you?   Yes No
    210 of 219 people found this answer helpful.
  • Asked by Brent from Chickasha, Ok
    04/17/2014
    Q
    How much Hi-Yield 2, 4-D should I mix in my 15 gal pull behind sprayer?
    A
    The mixing ratios will vary according to where you are treating and what you are treating for. According to the Hi-Yield 2, 4-D Selective Weed Killer product label, in pastures and range land: Use 1 gallon in 15 gallons of water;  or small areas, use 3 to 4 fluid ounces (6 to 8 Tablespoons) per 1,000 square feet; mix 1 to 3 gallons of water and apply uniformly over the area. On Ornamental Turf: Use 1 gallon in 15 gallons of water per acre. Please review the product label for complete usage instructions.
    Was this answer helpful to you?   Yes No
    169 of 260 people found this answer helpful.
  • Asked by Leah from Cedar Vale, Ks
    05/11/2013
    Q
    How long after spraying our pasture with Hi-Yield 2, 4-D can cattle horses return to graze?
    A
    VPG advises to wait a minimum of 30 days after application of  Hi-Yield 2, 4-D Selective Weed Killer before allowing animals to graze.
    Was this answer helpful to you?   Yes No
    159 of 181 people found this answer helpful.
  • Asked by John from St. Augustine, Fl.
    10/01/2011
    Q
    Amount of 2,4-D per gallon of water in hand sprayer?
    A
    It depends on how much you are trying to treat.  One pint of 2,4 D will treat 1/4 acre of land and should be applied in at least 4 gallons of water over 1/4 acre.  This works out to be about 3 ounces per 1000 square feet.  It really doesn't matter how much water you use, but the 3 ounces has to be applied over the 1000 square feet.
    Was this answer helpful to you?   Yes No
    150 of 253 people found this answer helpful.
  • Asked by Frank from Jacksonville, Fl. 32244
    05/21/2014
    Q
    Will Hi-Yield 2,4d kill crabgrass or nutsedge?
    A
    Hi Yield 2, 4-D is not labeled to kill/control nutsedge or crabgrass as it is primarily used for more common broad leaf weed control. Due to nutsedge being a difficult weed to control, often you need a very specific product just for the nutsedge in the yard and will need to use something like Sedgehammer. If you have warm season grasses (with the exception of St Augustine grass) Dismiss South will control broadleaf weeds, crabgrass and nutsedge. If you would like to give us the type of lawn you have, how much area you are looking to treat, and if there are any other weeds you are looking to target in particular, we can try to find a product best suited to your specific needs.
    Was this answer helpful to you?   Yes No
    140 of 149 people found this answer helpful.
  • Asked by Jan from Curlew, Wa
    07/24/2017
    Q
    How soon can I water after applying Hi-Yield 2, 4-D Selective Weed Killer?
    A

    You should wait to irrigate at least 24 hrs following application of  Hi-Yield 2, 4-D Selective Weed Killer.

    Was this answer helpful to you?   Yes No
    134 of 138 people found this answer helpful.
  • Asked by James from Waco, Texas
    02/05/2012
    Q
    Will Hi-Yield 2, 4-D Selective Weed Killer kill clover?
    A
    Hi-Yield 2, 4-D Selective Weed Killer is labeled for sweet clover and white clover. The product label does note that light applications of Hi-Yield 2, 4-D Selective Weed Killer will injure white clover but that it may recover and repeat applications will be needed to kill the weed.
    Was this answer helpful to you?   Yes No
    132 of 148 people found this answer helpful.
  • Asked by Al from Twin Lake,mi.
    05/07/2013
    Q
    When can my dog go outside after treating my yard. with Hi-Yield 2, 4-D?
    2,4-d used for weeds in west mi.
    A

    It is safe for pets and children to re enter the treated area, after the treated area has dried. This will take approx. 4-6 hours.

    Was this answer helpful to you?   Yes No
    112 of 117 people found this answer helpful.
  • Asked by Barrett from Kentwood Louisiana
    04/04/2014
    Q
    How much 2,4-d do I mix with a gallon of water to kill clover and dollar weed?
    A
    You want to mix  approx. 4 oz Hi-Yield 2, 4-D Selective Weed Killer per gallon of water over 1000 sq feet. Please be sure to consult the product label before application.
    Was this answer helpful to you?   Yes No
    110 of 124 people found this answer helpful.
  • Asked by Chris from Charles Town, Wv
    08/11/2013
    Q
    Will 2-4-D kill Clover?
    A
    Yes, the Hi Yield 2, 4-D will control some clover and other broad leaf weeds without doing damage to your lawn. Please refer to the product label to ensure the type of clover you have is covered. Please let us know if you have any other questions.
    Was this answer helpful to you?   Yes No
    94 of 113 people found this answer helpful.
  • Asked by Brian from Granger
    04/26/2015
    Q
    I want to plant a food garden where I have already spayed Hi-Yield 2, 4-D Selective Weed Killer.
    How long before I can plant tomatoes, asparagus, pumpkins, peppers, etc?
    A
    Hi-Yield 2, 4-D Selective Weed Killer is not labeled for use around edibles. You should not plant any edibles in soil that has been treated with Hi-Yield 2, 4-D Selective Weed Killer for at least a year after a treatment has been performed.
    Was this answer helpful to you?   Yes No
    93 of 107 people found this answer helpful.
  • Asked by Kaylen from Rigby, Id
    07/07/2016
    Q
    After applying Hi-Yield 2,4-D Selective Weed Killer to my lawn how long should I wait before mowing?
    A

    You should not mow within 2 days of applying Hi-yield 2,4-D Selective Weed Killer for the best results.

    Was this answer helpful to you?   Yes No
    90 of 96 people found this answer helpful.
  • Asked by Jimmy from Clifton Tx
    05/17/2015
    Q
    How long after a rain can I spray my fence line with Hi-Yield 2, 4-D Selective Weed Killer?
    A
    Hi-Yield 2, 4-D Selective Weed Killer should be applied to the fence line after the rain has stopped, the ground has dried completely and you are not expecting any additional rainfall within 24 hours or more. Please refer to the product label for complete mixing instructions.
    Was this answer helpful to you?   Yes No
    77 of 90 people found this answer helpful.
Displaying 1 to 20 (of 320 questions)