Jeremiah from Colleyville, Tx writes
I live in Dallas Tx. I deal with St.Augustine and Bermuda. No cool season grass. My sprayer sprays 2 gal of water over 1000sq ft. Pressure is somewhere around 30 psi. It holds 20 gal of water. How much Blindside do I need? Also if I wanted to spot spray and my sprayer holds 4 gal, how much do I use in it?
Per the label instructions, you can use .15 - .23 oz / per 1000 sq feet of Blindside Herbicide WDG for warm season turf. So for example, at the highest rate of .23 / 1000 sq ft, and you are using 2 gallons of water to cover 1000 sq ft, in your 20 gallon sprayer you would use 2.3 oz and it would cover 10,000 sq ft. For your 4 gallon sprayer, you will need to calibrate by determining the volume of water required to treat 1,000 sq ft. Use this calibration volume to determine the amount of water and Blindside Herbicide WDG needed to treat the target area. (If using 2 gallons to cover 1,000 sq ft, then at the highest rate of .23 / per 1,000 sq ft, you would use .46 oz of Blindside Herbicide WDG in your 4 gallon sprayer).
Answer last updated on: 02/28/2017
