• Please Note: If you have questions about an order you placed, shipping policies, product availability or product returns, please do not use this form. Direct these questions to our customer support center or by calling 866-581-7378.

    Most product questions are answered within 24 hours.
    Not all questions and answers will appear on our website. Thank you for choosing DoMyOwnPestControl.com!
  •  
  • * (limit 110 characters)
  • (optional)
  • *
  • *
  •   (city, state)
  •     Cancel

Q&A Home

Dan from Pittsburgh Pa writes,
03/20/2013:

How much solution of the Termidor Sc or Talstar P should I spray in the ground were the holes were drilled?

I had my house serviced by a pest co.and they drilled holes every 12 inches,how much solution of the Termidor Sc or Talstar P should I spray in the ground were the holes were drilled(concrete)...Dan

Answer:

We recommend you use the Termidor SC as it is a much better termite control product. Per the product label you will still need to use 4 gallons of finished solution for every 10 linear feet. So if there is 1 hole every 12 inches you should apply .4 gallon of diluted solution per drilled hole to achieve the correct continuous barrier rate. You can use a sprayer with the nozzle adjusted to pinstream to apply the product to the holes or you can use a funnel inserted into the drilled holes and pour the solution in with a bucket.

Answer last updated on: 03/20/2013

8 of 9 people found this answer helpful. Was it helpful to you?   Yes No