Meridian 0.33 G Insecticide

$118.02

Free Shipping!  Free Shipping!

Not for Sale to: AK, HI, NY
NY residents, see our New York Pest Control page.

5 out of 5 stars Rating: 5

1 Review

 Compare

{ $118.02 { $115.31
  Size/Description Price/Ea. Qty
Meridian 0.33 G Insecticide bag (40 lbs)

Buy 1: $118.02 each

Buy 2 or more: $115.31 each

$118.02
Total Price: $0.00

You May Also Need:

Select
Headway G Fungicide Granules Headway G Fungicide Granules
$86.50
Select
Hi-Yield Herbicide Granules Hi-Yield Herbicide Granules
$31.28
Select
Cyzmic CS - 0.4 oz Cyzmic CS - 0.4 oz
$8.98


Availability: Normally ships in 1 business day.
For large order quotes, please call us at 1-866-581-7378.

Meridian 0.33 G Insecticide

The Meridian 0.33 G Insecticide is a broad-spectrum insecticide that is effective at killing many pests in the foliage and soil. Water, whether from rainfall or irrigation, causes the key ingredient of the product, Thiamethoxam, to be released from the granule. It is rapidly absorbed, once released by the affected plants and drawn into the soil. Once in the ground, the insecticide controls pests, either by killing them on contact or through ingestion of the active ingredient. It is also quickly absorbed by the plant's roots. The active ingredient moves through the plant to the site of infestation. Through eating the plant, the pests are affected by the thiamethoxam. The pests stop feeding within minutes to hours of ingestion and will be followed rapidly by the death of the pest. The persistence of the solution in the dirt of the area, as well as the plants, provides a long period of control of the population of the pests. Meridian 0.33G is not an egg killer or an IGR.




Broad-spectrum Insecticide

Meridian provides preventive and curative control of grubs, billbugs, and other foliar insect pests. Meridian will quickly control or prevent most pests that damage turf, trees, and shrubs and it fits the operational requirements of a lawn care operator because of a wide application window and relaxed water requirements. Meridian is quickly becoming a cornerstone in helping to keep customers’ lawns and landscapes healthy, green, and pest free.

Unique mode of action - Low rates - Excellent control

Meridian controls a wide variety of sucking and chewing pests at very low rates, both through contact and ingestion activity. Key chemical attributes make Meridian very effective in both foliar and soil applications. In foliar uses, Meridian dries quickly and is taken into the leaf, providing fast insect control. When applied to the soil, Meridian is absorbed and transported to the upper portions of the plant, while still remaining available for sub-surface control. This is due, in part, to its relative solubility, which allows the product to move through organic matter for very effective control of soil insects.

Wider application window with relaxed water requirements

Meridian offers the lawn care operator flexibility by widening the window of application, by providing season-long preventive control on their schedule. Immediate watering by your customers or Mother Nature is not required, as Meridian is effective even if there is no rain or irrigation for up to a week after application.

Broaden your spectrum and your efficacy

Meridian provides comprehensive control of both key foliar pests and soil pests like grubs and fire ants. In fact, you can achieve very effective fire ant control in just four to five days with a mound drench, compared to 60 days with the leading product. Meridian mixes well with other insecticides like Scimitar® CS to target a wider spectrum of foliar pests, including caterpillars, cutworms, and adult beetles.

Curative properties solve customer issues quickly

Meridian is labeled for curative control, and is effective through late second instar white grubs. Meridian insecticide’s outstanding water characteristics allow the product to quickly move into the soil profile. Outstanding uptake properties allow Meridian to travel within the plant more easily and over greater distance than other insecticides, giving you the versatility to also use the product to protect trees and shrubs from insect damage.

Powerful and versatile—yet gentle

While Meridian is highly effective on insects, it’s easy on plants. Studies have shown safety in trials where applications were up to four times the prescribed use rates. There is also versatility in the formulations, with both a 0.33G inert granular product and a 25WG (wettable granule) for spray applications.

Pests Application Timing Dosage of Meridian 0.33 G Insecticide

Larvae (white grubs) of: Aphodius species, Asiatic garden beetle, Billbugs (Sphenophorus species), Black turfgrass ataenius, European chafer, Green June beetle, Japanese beetle, May or June beetle (Phyllophaga species), Northern masked chafer, Oriental beetle, Southern masked chafer

Apply up to 45 days before the historical peak of adult flight to 2nd instar grub of the species being targeted. For optimum control, treat from peak flight to peak egg hatch. To control grubs, make the application from egg hatch to second instar (grubs less than half their full size). 7 - 9 lb. /5,000 sq. ft. or 60 - 80 Ib./Acre (1.5 to-2 bags/Acre) See table below for spreader calibrations settings
Craneflies (Tipula species) For optimum control, apply at oviposition (egg lay)  
Mole crickets (suppression) (Scapteriscus species) To reduce mole cricket damage, treat from first egg hatch to peak egg hatch.  
Chinch bugs (Blissus species) Apply when young nymphs are first observed.  
Flea beetles Leafhoppers Greenbugs Sod webworms Spittlebugs For optimum control, make application when populations are first observed.  
Ants (excluding Carpenter, Fire, Harvester, and Pharaoh ants) To control ants, treat when ant mounds are first observed. Green and tee surfaces: To achieve optimum control, treat the affected area plus a surrounding 30 foot buffer. Fairways and roughs: treat at least 1.5 times the infested area. Water in to adequately move active ingredient to target area. For additional knockdown activity, utilize with Scimitar® GC Insecticide in an insect control spray program. Consult the Scimitar GC Insecticide label for use.  

For specific information about developmental stages of the target pest and optimal timing of applications, consult with your State Cooperative Extension Service.

Note: For turf with heavy thatch (more than 0.75”), use the higher rates within the specified rate range. Do not exceed 80 pounds of Meridian 0.33G per acre per year. Meridian 0.33G (is not phytotoxic) can be used on all major turfgrass species.

Note: Meridian 0.33G provides suppression of mole crickets on turfgrass. Suppression can mean either erratic control, ranging from good to poor, or a consistent level of control below that generally acceptable for commercial purposes. Refer to additional comments under Use Information section relating to turfgrass applications.

Spreader settings for Meridian 0.33G Insecticide: Spreader settings are influenced by factors such as speed, equipment wear, and condition of spreader. Use the following chart as a guide in establishing accurate calibration of your spreader to properly apply Meridian 0.33G at labeled rates. Carefully calibrate application equipment prior to commercial use of this product.

Spreader Type Speed (mph) Meridian 0.33G Spreader Settings 60 lb./Acre 80 lb./Acre
Agrifab Rotary 3 6 3/4 7 1/4
Anderson’s Rotary Model SR 2000 3 I 1/4 J1/8
Earthway Ev-N-Spred Rotary Model 2170 3 10 1/2 13
Gandy Drop 3 22 1/2 25
Lesco Commercial Plus 3 9 11
Lesco Drop 3 23 25
Lesco Rotary 3 C D
Permagreen Magnum B1B Rider -Side hole setting= 7 4 9 11 1/2
Prizelawn BF1 Pull behind rotary model 3 L N
Prizelawn Rotary Model CBR-III 3 J K 1/3
Scotts Precision Green drop 3 3 1/4 3 3/4
Scotts Pro Turf Professional Drop 3 3 3 1/2
Scotts Rotary Model SR-2000 3 J 1/2 K 1/2
Spyker Rotary Model 46-22 3 3 1/3 3 1/2
Vicon 4 1/4 23 28

APPLICATIONS TO ORNAMENTAL PLANTS

Soil-Inhabiting Pests

Pests Plant Type Dosage of Meridian 0.33G
Larvae (white grubs) of: Aphodius species, Asiatic garden beetle, Billbugs (Sphenophorus species), Black turfgrass ataenius, European chafer, Green June beetle, Japanese beetle, May or June beetle (Phyllophaga species), Northern masked chafer, Oriental beetle, Southern masked chafer All plant types 7 – 9 lb./5,000 sq. ft. or 60 - 80 lb./Acre (1.5 to 2 bags/Acre)

Application timing for Grubs:

  • Apply up to 45 days before the historical peak of adult flight to 2nd instar grub of the species being targeted.
  • For optimum control, treat from peak flight to peak egg hatch.
  • To control grubs, make the application from egg hatch to second instar (grubs less than half their full size).
  • Note: If leaching, wait a minimum of 7 days after application to allow for maximum uptake of Meridian 0.33G by the plant’s root system.
  • Apply to the soil before pests are evident in situations where tolerance of insects or damage is low. Allow a minimum of one week for smaller plants and at least 2 weeks for large plants to translocate Meridian 0.33G to feeding sites of the target pest.
  • Do not exceed 80 pounds per acre per year when making applications to the soil for ornamentals.

For specific information about developmental stages of the target pest associated damage and action thresholds to properly time applications consult with your State Cooperative Extension Service. Refer to additional comments under Use Information section relating to turfgrass applications.

Above-Ground Pests

Pests Plant Type Dosage of Meridian 0.33G
Adelgids (including Hemlock Wooly Adelgid), Aphids, Flea beetles, Japanese beetle adults, Lace Bug, Leaf beetles, Leafminers, Mealybugs, Root Aphid, Root Weevil larvae (including Diaprepes abreviatus), Sawflies, Soft Scales, Spittlebugs, Tent caterpillars, Thrips-foliar feeding (suppression), Whiteflies Annuals & small woody landscape plants 7 – 9 lb./5,000 sq. ft. or 60 - 80 Ib./Acre (1.5 to 2 bags/Acre)

Application Timing for Above-Ground Pests:

Preventive: Apply 1 to 4 weeks before pest has historically been observed.

Curative: Allow 1 to 4 weeks for reduction in pest density to occur.

Note: Larger plants require the longer interval.

  • Note: If leaching, wait a minimum of 7 days after application to allow for maximum uptake of Meridian 0.33G by the plant’s root system.
  • Apply to the soil before pests are evident in situations where tolerance of insects or damage is low. Allow a minimum of one week for smaller plants and at least 2 weeks for large plants to translocate Meridian 0.33G to feeding sites of the target pest.
  • Apply to landscape ornamental plants to reduce populations of aphids, whiteflies, and mealybugs, which produce honeydew which serves as a food source for some ant species.
  • Do not exceed 80 pounds per acre per year when making applications to the soil for ornamentals.
  • Apply the proper rate as a broadcast treatment to the root zone of plants.
  • Irrigate after application for optimum control.

Rating Snapshot

5 stars   1
4 stars   0
3 stars   0
2 stars   0
1 star   0

See all 1 reviews »

Average Customer Rating
5 out of 5 stars (1)

Write a Review

Sort By: 

  


  • 5 of 5 stars  Customer service
    By Mark in Metairie, La on 08/15/2017

    Upon calling the company for advise as to which product would be best I was helped by a young lady (dont remember name) who was extremely kind an helpful and guided me to 2 different products which would do the job. I went with the Meridian and I'm seeing some results already. Hopefully this will put an end to these vicious sod webworms.

    Was this review helpful to you?  Yes No

See all 1 customer reviews »

Have a question about this product?
Ask our product experts...

Ask a Question

There aren't any questions for this product yet. Be the first.


Purchase and Buy Meridian 0.33 G Insecticide for sale now
with the best online lowest price and free shipping!


We only sell professional do it yourself pest control (diy), exterminator and extermination
pesticide, chemical and bug killer treatment products to spray, exterminate and eliminate pests.

These products are not available in stores such as Home Depot, Lowes, Walmart or Ace Hardware.
We accept VISA, MasterCard, American Express, Discover and PayPal Payments.