Why Shop with Us
Customers also Bought:
Mold Ram WILL NOT treat existing mold. To treat exisitng mold, we recommend BORACARE with MOLD-CARE.
Mold Ram is applied to clean, raw wood to prevent mold from growing on the treated surface, basically making the wood "mold proof". MOLD-RAM is an EPA-registered product that offers exceptional, long-term prevention of surface mold and mildew. The active ingredient, chlorothalonil, can be used with confidence on wood, wallboard, concrete and masonry (cinder) block contstruction materials to inhibit growth of mold organisms. It can be used during construction or on existing structures. Mold-Ram can be used along with other wood protective products such as Bora-Care, and Timbor. Mold-Ram is mixed with water at the rate of 2.5 ounces per gallon to cover approx. 500 sq. feet of building material surface. One quart will cover approx. 6,250 sq. feet.
This product used to be sold and marketed under the Envincio brand name.
|Active Ingredient:||chlorothalonil 40.4%|
|For use in:||For use on raw, untreated wood. Will not treat existing mold problems. Rather, it makes clean wood "mold proof".|
|Shipping Weight:||3.00 lbs|
MOLD-RAM is an EPA-registered product that offers exceptional, long-term prevention of surface mold and mildew. The active ingredient, chlorothalonil, can be used with confidence on wood, wallboard, concrete and masonry (cinder) block contstruction materials to inhibit growth of mold organisms. It can be used during construction or on existing structures.
Mold-Ram can be applied with borates such as Bora-Care
Mold-Ram can be applied with a sprayer or paint brush, and can be applied along with other wood protective products used for termite control and to prevent wood decay, such as Bora-Care. It can be applied after treatments of the above mentioned products, or Mold-Ram can be mixed directly with a Bora-care mixture (as well as other borate products) and both products can be applied at the same time.
Mold-Ram prevents mold and mildew from growing.
Mold-Ram will not treat existing mold, rather it prevents mold and mildew from growing. Mold-Ram can be used in conjunction with mold remediation programs, however Mold-Ram can only be applied after all visible mold growth has been removed and conditions conducive to new mold development have been corrected. Existing mold should only be treated and removed by experienced and licensed professionals.
Mold-Ram does not control wood decay or wood fungus, which is why it is best to use this product along with a borate such as Bora-Care.
Mold-Ram mixing and use information
Mold-Ram is mixed with water at the rate of 2.5 ounces per gallon to cover approx. 500 sq. feet of building material surface. One quart will cover approx. 6,250 sq. feet.
Mold-Ram is white in color when applied and dries clear. A dye such as Turfmark Blue can be added to the Mold-Ram mixture so that the application is lightly visible to aid with inspection or to verify that full coverage of the product over the target area has been achieved.
Surfaces should be wet evenly, without runoff or pooling, and allowed to thoroughly dry.
If Mold-Ram is used in interior living spaces, the treated wood must be covered with an overlayment such as paint, wallpaper, siding, wallboard or flooring.
When applying Mold-Ram, it is recommended to wear a long-sleeve shirt, shoes plus socks, protective eye wear and waterproof gloves.
See all 1 reviews »
0 of 8 people found this review helpful:
By Mike in Garland Texas on 12/21/2010
Unfortunately, the mold problem we have occurs only in the summer. If you would like to email me about August, I may have some information for you. Thanks Mike
Have a question about this product?
Ask our product experts...
Ask a Question
QCan Mold Ram be used on drywall? If not do have a product that can mold proof drywall?
AYes, Mold Ram can be used on wall board and sheetrock. Remember that Mold Ram will not treat existing mold; it will only protect a surface from new mold. After treating an interior wall with Mold Ram, you must cover it with paint, wall paper, or some other covering to keep it from contacting people when they touch it. Pleae read the product label for complete instructions.
QCan Mold Ram be thinned with MEK, Acetone or Paint Thinner?
ANo. Mold Ram can only be mixed with water. Mixing Mold Ram with acetone or paint thinner could make a volatile solution.