Why Shop with Us
Customers also Bought:
Muck Boots Arctic Pro Bark Boot is a hunting boot that is suitable for professional extreme conditions. This boot is the warmest boot from the Muck Boots line. It will allow you to focus on hunting and not on keeping warm. It is flexible, lightweight and 100% waterproof. The topline binding is stretch fit, which will help keep the cold out and the warmth in by hugging your calves. The boot is made with CR flex foam that is 8mm with a four way stretch nylon. The outsole has great durability for rugged and agressive activities that will provide maximum stability and protection. There is a 2mm foam that is added to the instep area for more warmth. There are double reinforcements on the heel, achilles and instep areas. The midsole is EVA molded with a footbed that is contoured to provide hours of comfort. This Arctic Pro Bark Boot will provide long lasting comfort in extreme temperatures ranging from -60 to 40 degrees F.
|For use in:||Extreme outdoor conditions
|Material / Construction:||Bob tracker molded rubber
|Special Features:||Fully insulated with 8mm Neoprene. This provides the optimal warmth, comfort, and waterproofing that you expect from a Muck Boot.
A fleece liner is added to keep your feet warm in down to -60 degrees.
We wanted to make sure your feet were warm so we added an extra 2mm of thermal foam in the foot area.
The stretch-fit topline binding is snug around the calf to keep warm air in and cold air out.
The seamless construction allows for easy cleaning with the simple spray of the hose.
Double reinforcement in the instep, heel and achilles area where you need it most.
EVA midsole cushions with every step.
Our specially designed Bob-Tracker outsole is molded to be rugged, aggressive and durable.
|Warranty:||Limited one-year from date of purchase|
|Shipping Weight:||4.37 lbs|
|Manufactured By:||The Original Muck Boot Company (Mfg. Number: Acp-998k5)|
Q. What makes these boots so great?
A. It's all in the design. All MUCK BOOTS are 100% waterproof keeping feet warm, dry and protected in harsh weather and messy working conditions. The secret – our exclusive, self-insulating, waterproof CR-foam shell construction. The CR-foam bootie material acts as a “neutral medium” between inside and outside temperatures. Naturally lightweight, and very comfortable, the material keeps the foot and lower leg warm and protected in cold and wet conditions.
Natural rubber overlays act as a protective skin for the upper bootie. The upper has a triple-reinforced toe area and quadruple-reinforced heel area. The outsole is made of high abrasion natural rubber. The rubber in the boots will stay flexible for years.
Q. How are the boots sized?
A. Boots and shoes are available in whole sizes only, but will stretch to fit half sizes. There is a 15mm toe allowance built into the sizing.
Q. Do the boots fit wide widths?
A. Yes. Our boots are made to standard widths, but the materials will stretch to fit widths up to a EEE. For narrow feet, we suggest wearing a thicker sock or putting in an additional sock liner to take up room.
Q. Are the collar and calf stiff?
A. No. The upper calf and topline areas are made of soft, flexible CR-foam and will stretch. With the flexible upper, the pant leg can be worn over or inside the boot. The collar material can be turned down to allow hands-free removal and vent humidity in warmer working conditions.
Q. Should people wear thick socks?
A. It isn’t necessary unless activities are planned for extreme, cold conditions. The CR-foam bootie material is rated sub-zero during active use and will effectively withstand freezing temperatures for up to one hour. Medium-weight athletic socks should provide the best fit. The upper will stretch to accommodate thicker socks.
Q. How does CR-foam compare or rate against other lofted insulations and waterproof membranes?
A. Lofted insulations are typically used in work boots and hiking shoes to resist cold temperatures. They are typically laminated to the whole shoe lining or glued into the toe area of a shoe or boot. It is not a waterproof material.
The CR-foam used in MUCK BOOTS is both waterproof and self insulating. Our materials exceed the long-term effectiveness of waterproof membrane materials and provide greater insulating properties than all non-specialty temperature-control substrates.
Q. Do these boots allow your feet to breathe?
A. One of the most important and revolutionary features of MUCK BOOTS footwear is the structured, Breathable Airmesh lining used in all our products. Airmesh is made up of thousands of tiny vertical fibers that allow air to circulate throughout the interior lining surfaces. Excess humidity and perspiration that might build up in the boot are quickly wicked away. This creates a comfortable environment for your feet that lasts for extended periods of use.
Q. How do you care for and clean these products?
A. The rubber shell and nylon upper are very durable and clean up easily with a spray of water or gentle scrubbing with soap and water. The rubber upper can be conditioned with wax polish, Armor All or liquid detergent. It is not recommended to use conditioners on the outsole area. This may cause it to become slick in wet or icy conditions.
Q. Can the rubber be repaired if punctured?
A. Yes. The natural rubber can be repaired with sealant found in local hardware stores. We recommend Aquaseal brand marine sealant. First, clean the punctured area thoroughly with mineral spirits. Then, apply the sealant over affected area and wipe to a thin film. The sealant should air dry for at least 24 hours.