Why Shop with Us
Customers also Bought:
Muck Boots Chore Cool Mid-Cut Boot is a new version of the best selling Chore Boot. The Muck Boots Chore Cool Mid-Cut Boot has XpressCool, which is an exclusive moisture wicking lining that will help keep your feet dry and cool throughout warm weather. The bootie is made with 4mm CR flex foam nylon, that has four way stretch. This Chore Cool Mid-Cut Boot is lightweight, flexible and definitely 100% waterproof. The boot is triple reinforced in the toe area for added protection and in the heel area it is quadrupled reinforced. There is new vibram outsole attached to improve performance and durability. Additional arch support is added with steel shank and Etc sockliner lining to help reduce heat build up and friction. Great for hours of comfort ranging in temperatures from sub freezing to 95 degrees F.
|Special Features:||4mm NEOPRENE bootie with four-way stretch nylon, 100% waterproof, light-weight and flexible
Upper is triple reinforced in the toe area and quadruple reinforced in the heel area
Steel shank for additional arch support
Etc sockliner lining to reduce friction and heat build up
New Vibram outsole for improved durability and performance
Spandura added to the exterior of the neoprene for added protection against wear and abrasion
|Warranty:||Limited one-year from date of purchase|
|Shipping Weight:||4.91 lbs|
|Manufactured By:||The Original Muck Boot Company (Mfg. Number: cmct-900-5)|
Q. What makes these boots so great?
A. It's all in the design. All MUCK BOOTS are 100% waterproof keeping feet warm, dry and protected in harsh weather and messy working conditions. The secret – our exclusive, self-insulating, waterproof CR-foam shell construction. The CR-foam bootie material acts as a “neutral medium” between inside and outside temperatures. Naturally lightweight, and very comfortable, the material keeps the foot and lower leg warm and protected in cold and wet conditions.
Natural rubber overlays act as a protective skin for the upper bootie. The upper has a triple-reinforced toe area and quadruple-reinforced heel area. The outsole is made of high abrasion natural rubber. The rubber in the boots will stay flexible for years.
Q. How are the boots sized?
A. Boots and shoes are available in whole sizes only, but will stretch to fit half sizes. There is a 15mm toe allowance built into the sizing.
Q. Do the boots fit wide widths?
A. Yes. Our boots are made to standard widths, but the materials will stretch to fit widths up to a EEE. For narrow feet, we suggest wearing a thicker sock or putting in an additional sock liner to take up room.
Q. Are the collar and calf stiff?
A. No. The upper calf and topline areas are made of soft, flexible CR-foam and will stretch. With the flexible upper, the pant leg can be worn over or inside the boot. The collar material can be turned down to allow hands-free removal and vent humidity in warmer working conditions.
Q. Should people wear thick socks?
A. It isn’t necessary unless activities are planned for extreme, cold conditions. The CR-foam bootie material is rated sub-zero during active use and will effectively withstand freezing temperatures for up to one hour. Medium-weight athletic socks should provide the best fit. The upper will stretch to accommodate thicker socks.
Q. How does CR-foam compare or rate against other lofted insulations and waterproof membranes?
A. Lofted insulations are typically used in work boots and hiking shoes to resist cold temperatures. They are typically laminated to the whole shoe lining or glued into the toe area of a shoe or boot. It is not a waterproof material.
The CR-foam used in MUCK BOOTS is both waterproof and self insulating. Our materials exceed the long-term effectiveness of waterproof membrane materials and provide greater insulating properties than all non-specialty temperature-control substrates.
Q. Do these boots allow your feet to breathe?
A. One of the most important and revolutionary features of MUCK BOOTS footwear is the structured, Breathable Airmesh lining used in all our products. Airmesh is made up of thousands of tiny vertical fibers that allow air to circulate throughout the interior lining surfaces. Excess humidity and perspiration that might build up in the boot are quickly wicked away. This creates a comfortable environment for your feet that lasts for extended periods of use.
Q. How do you care for and clean these products?
A. The rubber shell and nylon upper are very durable and clean up easily with a spray of water or gentle scrubbing with soap and water. The rubber upper can be conditioned with wax polish, Armor All or liquid detergent. It is not recommended to use conditioners on the outsole area. This may cause it to become slick in wet or icy conditions.
Q. Can the rubber be repaired if punctured?
A. Yes. The natural rubber can be repaired with sealant found in local hardware stores. We recommend Aquaseal brand marine sealant. First, clean the punctured area thoroughly with mineral spirits. Then, apply the sealant over affected area and wipe to a thin film. The sealant should air dry for at least 24 hours.