Why Shop with Us
Customers also Bought:
The New York Outdoor Ant Kit contains the professional products you need to treat most common ant species found outdoors. This kit contains Arilon Insecticide, a non-repellent spray for application around the perimeter of the structure that comes in convenient pre-measured packets. The kit also includes Ants No More Bait Stations for use outdoors with Maxforce Quantum Ant Bait and Advance 375A Select Granular Ant Bait. The combination of using multiple baits to satisfy ants’ varying appetites and applying a non-repellent spray around the structure controls colonies from multiple angles for the best results.
This kit should be used as part of an Integrated Pest Management approach to ant control: it is crucial to practice good sanitation by eliminating competing food and water sources, and to eliminate harborage and entrance points to keep ants from entering the structure.
See all of our Ant Control Kits here.
New York Outdoor Ant Kit contains these products:
1 x Advance 375A Select Granular Ant Bait
1 x Ants No More Bait Station
1 x Arilon Insecticide
1 x Maxforce Quantum Ant Bait
Kit price: $140.00
You save $18.17!
|NOT FOR SALE TO:||CT, MA, NC, AK|
|Shipping Weight:||4.24 lbs|
Before applying any insecticides, it is important to inspect and to prepare the treatment area. Practice good sanitation by eliminating food and water sources that may compete with the baits you are about to apply. Outdoor sanitation includes tasks such as keeping outdoor trash cans cleaned and away from the structure, removing debris piles where ants like to harbor, and creating a dry zone adjacent to the structure by pulling back mulch, pine straw, or other barriers. Also, find ways to seal up and eliminate access points into the structure. These steps will help not only to treat an existing infestation, but also to prevent future problems. Once you have identified the hot spots where ants are trailing and could possibly enter the structure, you are ready to use the products in your New York Outdoor Ant Control Kit.
How to Apply the New York Ant Control Kit
STEP 1 - SPRAY - Arilon Insecticide
*Arilon Insecticide is a water-soluble granule concentrate that comes in convenient pre-measured packets. Each box contains 5 smaller boxes with 5 x 0.33 oz. packs, for a total of 25 packets per box. Arilon must be diluted in water only and applied with a pump sprayer.
*Arilon has a non-repellent active ingredient so that it will kill not only the ants that contact the spray directly, but also ants with whom they come into contact.
*The packets are not water-soluble, but they are compostable and biodegradable.
*To mix Arilon Insecticide, fill sprayer tank halfway with water. Open the desired amount of packets and empty contents into water (never apply in an empty tank). Agitate the mixture. Fill sprayer tank with the rest of the desired volume of water, then agitate again before spraying.
*Use 2 x 0.33 oz. packets per gallon of water for heavy infestations or cleanout applications. Use 1 x 0.33 oz. packet for maintenance or preventative applications. See the product label for complete dilution instructions.
*Apply Arilon mixture around the foundation of the structure, creating a band 1-3 feet up onto the structure and 3-5 feet out onto the ground around the structure. Also apply the solution to areas where ants are likely to enter the structure, such as around window frames, door frames, where utilities such as pipes enter, and edges of structures such as along eaves.
*Arilon Insecticide also may be applied to other areas where ants are seen trailing or foraging, such as around flower or mulch beds, in surrounding turf areas, and in crawl spaces.
*Only mix enough solution for the current application. Most exterior treatments will take 1-2 gallons of finished solution. Do not store diluted mixture in your sprayer; instead, use up the product that you have mixed, and then clean and allow your sprayer to dry.
*Keep people and pets out of the treatment area until the application is dry, usually about an hour.
*Do not apply Arilon to edible plants such as vegetable gardens or fruit trees.
*Arilon Insecticide may be reapplied, if needed. For heavy infestations, you may perform one follow-up after 7 days. Otherwise, do not apply Arilon more than once per month.
*Store remaining concentrate out of direct sunlight or extreme temperatures for up to 3 years.
*If you are using baits outdoors, do not make spray applications directly on top of bait or bait stations.
*Arilon Insecticide also can be used indoors as a spot or crack and crevice treatment for many common pests.
STEP 2 - BAIT - Ants No More Bait Stations, Advance 375A Select Granular Ant Bait, Maxforce Quantum Ant Bait
*Allow spray application to dry before placing stations.
*Always use bait in clean, dry bait stations.
*The Ants No More Bait Stations are designed for discreet outdoor use, protecting bait from rain, sunlight, and non-target animals. The two interior compartments allow you to use two different ant baits in each station. You will apply the Advance 375A Select granules in one side, and the Maxforce Quantum Ant Bait in the other side.
*This kit contains 12 bait stations, but you may not need to use all of them at once. Stations should be place approximately 25 feet apart, so most homes may only use 4 stations around the perimeter of the structure. Stations may be placed in other areas of high ant activity, keeping in mind that it is neither necessary nor ideal to eliminate all the ants from an outdoor area.
*To open the stations, line up the arrow on the cylindrical body (there is a dip in the station) with the center mark on the lift tab of the lid.
*Push up on the lid, then push back on the opening so the lid can pop up.
*To apply the Advance 375A Select granules, gently unscrew the lid. Either gently tap bait into one side of the bait station, or use a plastic spoon or other dedicated tool to scoop bait into each station. Use up to 1.5 oz. of bait per station (each side of the station holds 2 oz. of bait). You should not fill the granules all the way to the top of the compartment.
*To use the Maxforce Quantum Ant Bait, first remove the blue cap from the tube. For your first application, you will need to cut the tip of the tube with a knife or sharp shears to create an opening. Cut approximately 1/4 in. from the tip to create an opening about 1/8 inch in diameter.
*The Maxforce Quantum Ant Bait may be used as is, or it may be mixed into a sugar solution to create more bait. We recommend making the following mixture to get the maximum use out of your bait:
- You will need clean water, bait, granulated sugar, a container for mixing, and either a lid to cover and shake the solution or a spoon or other tool to mix the solution.
- To make enough solution to fill one compartment in each of 4 stations: in 8 ounces of water, mix 1 ounce (30 g) of Maxforce Quantum and 2 ounces of sugar. Distribute evenly in each station.
- To make enough solution to fill all 12 stations: in 24 ounces of water, mix 3 oz (90 g) of Maxforce Quantum and 6 ounces of sugar. Distribute evenly in each station.
- Do not store extra solution more than a few days since bacteria and mold may develop.
*Replace the lid on filled stations by popping on at any orientation.
*Place stations in the ground up to the first entry and exit holes in the stake.
*Check stations after a few days to determine if placements need to be altered or bait needs to be replenished.
*If baits appear moldy or granules are wet and puffy, replace with fresh bait as needed.
*Maxforce Quantum also comes with 10 refillable bait stations. Maxforce Quantum can be applied in these stations by placing a small amount (do not overfill) in one or more of the small interior compartments, then closing the station like a book. Be sure the lid is secure, then place stations in areas of ant activity such as near trails or nests, near the foundation, or along fence lines. Replenish bait as needed.
*Advance 375A Select granules can be used on the ground directly, although we recommend using these applications sparingly since bait is protected from rain and other weathering inside bait stations. Use 0.3-1.0 oz. per visible ant trail, up to 2.1 oz. per ant mound, or broadcast at a rate of 1 lb. per acre (0.4 oz. per 1,000 sq ft.). Apply when the ground is dry and rain is not expected for at least 24 hours.
*Bait stations may be wiped clean and rinsed with water as needed. Avoid using harsh cleaners or fragrant soaps as these may make baits less palatable to the ants.
*Store baits in a dry, temperate area, out of direct sunlight. Baits are best used within a year of opening.