The Complete Bed Bug Treatment

2. Prepare The Area

A thorough cleaning of the premises will make control efforts much more effective. Strip all beds down to the bare sleeping surface. Bedding (sheets, blankets, comforters, covers, and shams) should be laundered or professionally cleaned. Personal items (stuffed animals, soft toys, blankets) should be removed and cleaned. Clutter should be removed from furniture tops and bed stands. Open up the clock radio and phone (that's right, Bed Bugs may be hiding in there too!). Tap the open ends into a bag or on sticky tape so the bed bugs can’t jump and hide.

Clothing should be removed from dressers and chests. Utilize a crack & crevice tool to remove bed bugs from deep harborage such as: under baseboards; under carpet edges (pull up along the tack strip); around switch plates (you may have to remove the plate first); from the bed frame; inside box springs; inside furniture; and from floor cracks.

Use a hand-brush attachment to vacuum: mattresses and box springs (especially along seams and folds); upholstered furniture; and behind drapes. After vacuuming, remove the bag from the vacuum, tie it tightly, and remove it from the premises. If you have anything that can’t be cleaned, vacuumed, or treated then consider either freezing it for a week or two, or putting it in a dark bag outside for several days where the temperature inside the bag will reach at least 120 degrees.

3. Attack the Bed Bugs Where They're Hiding

In other words, treat all of the perimeter walls/voids of the infested room first. This is accomplished by removing the switch plates and wall fixtures to gain access between the wall where bed bugs like to hide. If it is possible to gain access underneath the baseboards so no dust will remain in the living space, inject dust under the baseboards using a hand duster for safer and easy application of the dust. Delta Dust (waterproof and good for damp climates), and Drione are effective for these types of applications. Wall void dusting is especially recommended when treating apartments and multi-unit housing.

TIP: Treat perimeter wall voids on adjacent rooms first. This will prevent the bugs from escaping out the other side into rooms that are not infested.

Dust may also be applied more easily along baseboards by pulling the carpet up from the tack strip and then putting it back into place. DO NOT spread dust over the carpets or under the carpets. Dusts are only for cracks and crevices, in wall voids and under baseboards, not where people or animals are.

Certain liquid insecticides that we sell on our website will provide quick knock-down and long residual control of bed bugs with low hazard to occupants when applied correctly. Liquid residuals, such as Suspend SC or Tempo SC Ultra can also be applied as a crack and crevice treatment under baseboards. However, dusting is still preferred as it lasts from 6-8 months. Spot treatments may be appropriate around fixtures.

Another highly suggested treatment option is the Gentrol IGR products. These come in a concentrate or aerosol. The Gentrol IGR is an Insect Growth Regulator. It will stop the Bed Bug from maturing and reproducing and will be a great aid in stopping the infestation. The concentrate comes in a small 1-ounce vile which can be added to one gallon of water in a pressurized sprayer and applied to all areas of the room. For a double dose spray, apply the vile directly to a diluted gallon of Suspend SC or other liquid insecticide concentrate. The Gentrol IGR Aerosol can be used if you don’t want to use Gentrol concentrate in the sprayer. The aerosol comes out of the can as a foam and is easily absorbed into the carpet and other areas.

4. Next, Treat the Bed

The bed area needs to be treated next. You will want to focus heavily on this area as most of the bugs will be found here. Look carefully at the headboard, foot board (if present), box spring/support platform and frame. All cracks and crevices of the bed structure must be treated with a residual such as Suspend SC, Demand CS, or Tempo SC Ultra.

Mattresses may be treated with labeled non-residual products such as the following aerosols: CB-80 extra, 565 Plus XLO, or D-force HPX. Some of the residuals like Suspend SC can be applied directly to mattresses and sleeping surfaces along seams, tufts and folds. Box spring tops should be treated in a manner identical to mattresses. The underside of the box spring may be sprayed with liquid insecticides as well; spot treated with labeled aerosols or for long residual, treated with dusts such as Drione, or DeltaDust .

TIP: After treatment of the bedding and after it has dried thoroughly, covering the mattress with a plastic or allergy-proof cover will help prevent re-infestation.

5. Last, Treat the Furniture (Night Stand, Chests, Dressers, Couches and Chairs)

The last step is to do a very thorough crack and crevice treatment of the furniture in the room. For wooden furniture pieces, you can not miss any cracks. Apply liquid residuals Suspend SC or Tempo SC Ultra, or aerosol residual sprays such as CB D-Force HPX or CB Intruder. For upholstered furniture, use a similar treatment as the mattress and box spring. Always turn infested furniture over and treat from the bottom. Look carefully underneath all the legs of the furniture! Some furniture may have hollow metal framing (children’s bunk beds are an example). Treat inside the metal tubing with dusts, aerosols or liquids as discussed in the bedding paragraph above.

TIP: Please read the label carefully when applying directly to furniture. You may want to spot treat in an area of the furniture piece that is not visible to make sure that no staining occurs.

6. Finally, Follow Up

You will need to plan on retreating within 2 weeks. Do a thorough inspection again and treat any area where Bed Bugs are persisting or where they have moved. You may be-able to avoid reusing the insecticide concentrates and just use a contact spray such as the 565 Plus XLO or CB- 80. Your wall voids will not need to be re-dusted. If you treated your bedding properly and covered it in plastic, you may just need to retreat spot areas of the room.

TIP: Heavy infestations may need more than a second treatment. Be persistent!