Why Shop with Us
Customers also Bought:
The NoMol Mole Trap (4 Pack) is an economical and effective mole trap that sits right in the mole tunnel. It's a completely safe trap tool that is placed below the ground surface to catch moles, voles and even shrews. This mole trap is very easy to set up and can easily catch and trap unwanted pests that may damage lawns, backyards, gardens and other outdoor settings. Package includes four traps, four wooden stakes and a detailed directions for use sheet.
Note: Always use gloves in setting up mole trap for safety purposes.
|Target pests:||Moles, Shrews and Voles|
|For use in:||Outdoors|
|Application:||Trap can be easily installed and sit below the ground surface
* Please see Instructions Sheet
|Dimensions:||7" x 2.5" x 2"|
|Special Features:||* Rust Resistant
* Completely Safe
* Animal is committed to the trap when it is triggered
|Parts Included:||Four traps, four wooden stakes and detailed directions for setting|
|Shipping Weight:||0.75 lbs|
|Manufactured By:||Wildlife Control Supplies (Mfg. Number: NWSNM01)|
Instructions for Setting NoMol Traps:
IMPORTANT TIPS: Burying traps in the soil for several days eliminates manufacturing and human scents. Wearing gloves while handling the trap is recommended.
- Locate a tunnel or mound that indicates recent mole activity. (During dry periods, moles often stay inactive)
- With a hand trowel, dig a circular or oval hole in the grass/sod 6-8 inches in diameter and deep enough to reach the base of the tunnel.
- Carefully clean out each direction of the tunnel until the trap it can be freely inserted. Set the two traps by squeezing the coiled end and placing the ring perpendicular, about 1 ¾inches from the end of the tongs.
NOTE: Failure to clean the tunnel adequately may cause the trap to become sprung and plugged.
- Place one of the SET traps in one direction in the tunnel with tongs pointing downward.
- Secure trap by placing a ¼’ thick dowel through the opening of the coiled spring and into the soil so that the tip is visible about the ground but deep enough so that it is secure.
- Repeat steps 4 and 5 for other tunnel, inserting the second trap.
- After both traps have been properly set and inserted, take grass/sod patch removed in Step 2 and place it diagonally over the trap and opening of the tunnel. The grass blades should point toward the trap. Repeat the procedure for the other trap. Fill the hole with loose dirt.
- Check the traps every 2-3 days or after a rain. Remove the loose dirt and then lift the sod to see if each trap contains a mole or if it is snapped. If the trap(s) are not snapped, then cover as indicated in step 7. If snapped, reset and recover.
See all 4 reviews »
4 of 4 people found this review helpful:
NoMol Mole Trap
By Sherwood in Oxford Pa. on 05/01/2016
They really do the job! I have voles not moles but still does the job. Really pleased with them!
2 of 2 people found this review helpful:
NoMol Mole Trap
By Sherwood in Oxford Pa. on 04/10/2016
Working well in fact have bought some more to get rid of the little pests
Not great, but I'm still working with them.
By Steve in Norman, OK on 07/05/2016
I have trapped moles for several years and have tried pretty much every mole trap there is. I haven't given up on this trap but so far, I haven't caught any moles with them. The Trapline mole trap has worked better for me.
Works Well After Some Trials
By John in Merritt Island,FL on 02/04/2017
No early success in my sandy Florida soil. The tunnels kept collapsing. Then I figured out a solution. I found that I had good luck by smashing the main tunnels and soaking them with a hose. When the tunnel re-appeared, I set the traps - 1 in each direction. The wet soil was much more stable. I have now caught 3 moles in rapid succession. Also, the new traps can be hard to set due to the lack of friction between the jaws and the trigger. I used a small file to grind down a small amount of surface area on each. It did the trick. I have tried the worms and the castor oil granules before. They were no help.