OutLAST Pro Foaming Agent

5 out of 5 stars 1 Reviews | 5 Q&A

OutLAST Pro Foaming Agent
Price/Ea.
$22.89

Buy 2 or more: $20.51 each

Have a Question? Ask Our Pros!

Email Our Pros
We're here to help
Offline. Leave Us a Message

You May Also Need

Average Rating

5 out of 5 stars Rating: 5

1 Review | 5 Q&A

Product Overview

OutLAST Pro Foaming Agent is a surfactant-based foaming agent that is great for foaming insecticides, termiticides, cleaning products, and foam marking. It will produce long-lasting, thick foam that contains less drainage of liquid from the foam so you can outlast the competition. Foam will last 2-3 times longer and will stick better compared to other foaming agents on the market. This longer-lasting foam equals better results. This has a low surfactant load which means that it leaves less residue in the environment and treated areas. OutLAST Pro is compatible with cleaning agents and pesticide products. Use rate is 1/2 to 8 oz per gallon. Made in the USA.

OutLAST Pro Foaming Agent is ideal for use in the Foamer Simpson 5.0 (FSPU005).

Available in a 16 oz squeeze-n-measure bottle and a gallon jug.

Features and Specs

Active Ingredient Sodium lauryl sulfate, disodium lauryl sulfosuccinate - 18%
For use in Indoor or outdoor areas.
Application OutLAST Pro can be used with typical commercial foaming equipment available on the market and is compatible with a large range of products designed for industrial, commercial, agricultural and residential application such as: cleaning/disinfecting agents, bio sanitation products, pesticides and pest control products, animal husbandry uses, spray marking and more.
OutLAST Pro may be used in food-processing and food-handling establishments.
The product is an ideal choice for: improved coverage and contact time, minimization of loss, enhanced penetration, void filling such as wall voids and drains, short duration residual protection, increased contact time and/or moisture retention. To ensure good foam results and adequate coverage verify that all foaming equipment has been fully calibrated and is in proper working order.
General Mixing Instructions**:
1. Fill tank/reservoir with water
2. Add and mix in material to be foamed
3. Add OutLAST Pro and mix gently
**When mixing OutLAST Pro with any other manufacturers' product(s) read and follow all secondary manufacturers' label instructions and add OutLAST Pro as directed.
Pet safe Yes, if used as directed on the product label.
Not for aquatic use or post-harvest use on food or feed.
Special Features It is exempt from California's Prop 65 list of known carcinogens.
Shipping Weight 1.15 lbs
Manufacturer Rockwell Labs (Mfg. Number: OPFA016)
UPC 639737203868

Details

Use Rates - to produce a:

Lower Expansion (5-10* to 1) or Wet Foam - (1/2 -1 1/2 oz./gallon)

Higher Expansion (11-20* to 1) or Drier Foam - (1 1/2 - 8 oz./gallon)

*Expansion rates will vary due to temperature, water hardness, material added and foaming equipment used. Oil-based materials will generally require higher rates compared to water-based materials.

Not for aquatic use or post-harvest use on food or feed.

5 stars   1
4 stars   0
3 stars   0
2 stars   0
1 star   0
Review Search   
Sort Reviews
  • 5 of 5 Stars

    Clinging Foam

    By Keith on 10/08/2021

    Does exactly what's it supposed to do. I add it to a cement dissolver to clean my concrete pumper truck. Without it the cleaner just runs right off. Adding the foamer makes it cling to vertical surfaces which allows it time to work. End result I get more for my money out of the cleaner and a cleaner truck.

    Was this review helpful to you?  YesNo

    3 of 3 people found this review helpful

Questions & Answers

Have a question about this product?
  
Sort Questions
Q
Which is better, Outlast or Profoam?
A

Both Outlast and Profoam are very similar. They use the same active ingredients but are made by different manufacturers. Outlast is said to last 2 times longer than any other foaming agents. 

Was this answer helpful to you?  YesNo

6 of 8 people found this answer helpful

Q
Can I use OutLAST Pro Foaming Agent to make self tanning foam? Can it be used on skin?
A

OutLAST Pro Foaming Agent is not for use on skin.  It is only for use in foaming insecticides, termiticides, cleaning products and foam marking.

Was this answer helpful to you?  YesNo

3 of 3 people found this answer helpful

Q
Can OutLAST Pro Foaming Agent be mixed with Bio Drain?
A

OutLAST Pro Foaming Agent can be mixed with BioDrain as long as you have a foaming device like the Chapin Polyfoamer

Was this answer helpful to you?  YesNo

3 of 5 people found this answer helpful

Q
Can 100% ethanol be mixed with OutLAST Pro Foaming Agent?
A

OutLAST Pro Foaming Agent is not labeled to be mixed with ethanol, but you can check directly with the manufacturer to confirm.  Rockwell Labs can be reached at 816-283-3167.

Was this answer helpful to you?  YesNo

1 of 3 people found this answer helpful

Q
Can OutLAST Pro Foaming Agent be used with glyphosate to spot treat weeds in flower beds?
A

OutLAST Pro Foaming Agent is not for use in a sprayer.  It is only for use in foaming equipment when foaming insecticides, termiticides, cleaning products and foam marking.

 

Was this answer helpful to you?  YesNo

1 of 2 people found this answer helpful

See all 5 customer questions

OutLAST Pro Foaming Agent 5 out of 5 stars Rating: 5 (1 Reviews / 5 Q&A)

From $22.89 + Free Shipping*