Buy 2 or more: $98.63 each
Have a Question? Ask Our Pros!
Average Rating
There are no reviews for this product yet. Be the first.
Prime Source's Tebuconazole 3.6 is a fungicide that provides preventive and curative control against some of the most difficult diseases. Tebuconazole 3.6 Select can protect your ornamentals for up to 3 weeks against diseases such as midlews, rusts and blights. Tebuconazole 3.6 Select can be used to combat numerous diseases on all golf turf applications of cool and warm season grasses or their mixtures.
It targets zoysia patch, pink and gray snowmold, leaf spot, summer patch, gray leaf spot, dollar spot, brown patch, anthracnose and many others. Tebuconazole 3.6 Select features an aqueous suspension for great tank mix compatibility. It offers low use rates, 4 hours rapid uptake and optimal residual management. The fungicide is highly recommended to use on cool and warm season grasses. Apply it on commercial and residential landscape ornamentals, nursery and golf course turfgrass.
Product Documents
| Active Ingredient | Tebuconazole 38.7% |
|---|---|
| Target pests |
Anthracnose, Brown Patch, Dollar Spot, Gray Leaf Spot, Summer Patch, Leaf Spot, Pink and Gray Snowmold, Zoysia Patch and others * See label for complete list |
| For use in | Golf Course Turf, Field and Nursery container Ornamentals, Commercial and Residential Landscapes |
| Application |
Turfgrass: 0.6 oz. per gallon of water per 1,000 sq. ft. Ornamentals: 4 to 10 oz. per 100 gallons of water * See label for complete application instructions |
| Pet safe | Yes, if used as directed on Label (Toxic to mammals, fish and aquatic invertebrates) |
| Formulation |
Professional Product Group 3 Fungicide |
| NOT FOR SALE TO |
AK, CA, HI, ID, MT, ND, NV, SD WA, WY CT, NY (Restricted To Licensed Applicators Only) |
| Special Features | 4 hours rapid uptake |
| Shipping Weight | 9.91 lbs |
| Manufacturer | Prime Source |
| EPA Registration | 89442-1 |
Directions for Use
Spray Volume: Tebuconazole 3.6 Select may be applied in a minimum of 10 gallons of spray solution per acre by ground sprayer or in a minimum of 5 gallons of spray solution per acre by aircraft spray equipment. Check equipment calibration frequently. Complete coverage and uniform application are essential for the most effective results, especially when lower spray volumes are applied. If necessary, increase the spray volume per acre for complete crop coverage.
Chemigation: Apply Tebuconazole 3.6 Select through irrigation equipment only to crops and diseases for which the chemigation use is specified. Apply Tebuconazole 3.6 Select only through center pivot, lateral move, end tow, side (wheel) roll, traveler, big gun, solid set, or hand move; or drip (trickle) irrigation systems. Do not apply Tebuconazole 3.6 Select through any other type of irrigation system. Crop injury, lack of effectiveness, or illegal pesticide residues in the crop can result from non-uniform distribution of treated water. If you have questions about calibration, you should contact State Extension Service specialists, equipment manufacturers or other experts. Do not connect an irrigation system (including greenhouse systems) used for pesticide application to a public water system unless the pesticide label-prescribed safety devices for public water systems are in place. A person knowledgeable of the chemigation system and responsible for its operation or under the supervision of the responsible person, shall shut the system down and make necessary adjustments should the need arise.
The system must contain a functional check valve, vacuum relief valve, and low pressure drain appropriately located on the irrigation pipeline to prevent water source contamination from back flow. The pesticide injection pipeline must contain a functional, automatic, quick-closing check valve to prevent the flow of fluid back toward the injection pump. The pesticide injection pipeline must also contain a functional, normally closed, solenoid-operated valve located on the intake side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually shut down. The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the water pump motor stops. The irrigation line or water pump must include a functional pressure switch which will stop the water pump motor when the water pressure decreases to the point where pesticide distribution is adversely affected. Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm pump) effectively designed and constructed of materials that are compatible with pesticides and capable of being fitted with a system interlock. Do not apply when wind speed favors drift beyond the area intended for treatment.
Maintain continuous agitation in mix tank during mixing and application to assure a uniform suspension.
Allow sufficient time for pesticide to be flushed through all lines and all nozzles before turning off irrigation water. Pesticide may be applied continuously for the duration of the water application.
Mixing: Add labeled amount of Tebuconazole 3.6 Select into the spray tank while filling with water to the desired level. Operate the agitator while mixing. If other materials are added to the spray tank, the Tebuconazole 3.6 Select should be thoroughly dispersed prior to the addition of other materials. Do not tank mix with products containing a prohibition against tank mixing. Follow the most restrictive labeling requirements of any tank mix product.
Compatibility: To determine the compatibility of Tebuconazole 3.6 Select with other products, the following procedure should be followed: Pour the recommended proportions of the products into a suitable container of water, mix thoroughly and allow to stand at least five (5) minutes. If the combination remains mixed or can be re-mixed readily, the mixture is considered physically compatible. For further information, contact your local Prime Source, LLC representative.
Please see Product Label for additional application instructions, specific use rates and important precautionary statements.
There are no reviews for this product yet. Be the first.
This says only use on cucurbits as a foliar spray, but its a Acropetal (upward) movement. How do you use it and how much for pumpkins in a 1000sqft area
According to the product label when treating pumpkins for Gummy stem blight (suppression only) you will use 8 fl. oz. per acre.of Prime Source Tebuconazole 3.6 Fungicide. Apply the specified dosage in a protective spray schedule to foliage and fruit. Repeat applications at 10- to 14-day intervals. Note: For optimum disease control, the lowest labeled rate of a spray surfactant should be tank-mixed with Prime Source Tebuconazole 3.6 Fungicide must have two to four hours of drying time for the active ingredient to move systemically into plant tissue before rain or irrigation occurs.
