Buy 2 or more: $70.15 each
Have a Question? Ask Our Pros!
Average Rating
There are no reviews for this product yet. Be the first.
The Profile Terra - Matrix is a combination of thermally refind wood fibers, activator and cross-linked tackifiers to have the fiber matrix secured on the soil surface. It's also hydraulically applied and can prevent any polymer leaching. The Terra-Matrix can withstand rainfall events and have erosion protection up to 6 months. It's a special formula that provides cost-effective stabilization of the soil on constructions and building sites.
Product Documents
Active Ingredient | Thermally Processed Wood Fiber6 - 95% Crosslinked Biopolymers and Water Absorbents - 5% |
---|---|
For use in | Slopes, commercial grounds, rough graded slopes and bare spots |
Application |
Erosion control for slopes ranging from mild to steep ( less than or equal to 2H:1V) Rough graded slopes Equivalent performance to some rolled erosion control blankets with plastic nettings Enhancement of vegetation establishment |
Color | Green |
Material / Construction | Thermally Processed Wood Fiber |
Shipping Weight | 51.00 lbs |
Manufacturer | Profile Products LLC (Mfg. Number: CFTMX50) |
UPC | 040256121128 |
Installation:
Strictly comply with equipment manufacturer's installation instructions and recommendations. Use approved hydro-spraying machines with fan-type nozzle (50-degree tip). To achieve optimum soil surface coverage, apply SMM from opposing directions to soil surface. Rough surfaces (rocky terrain, cat tracks and ripped soils) may require higher application rates to achieve 100% cover. Slope interruption devices or water diversion techniques are recommended when slope lengths exceed 50 feet (15 m). Maximum slope length is for product applications on a 3H:1V slope. For application on steeper slopes, slope interruption lengths may need to be decreased based on actual site conditions. Not recommended for channels or areas with concentrated water flow. No chemical additives with the exception of fertilizer, liming and biostimulant materials should be added to this product.
Erosion Control and Revegetation:
For maximum performance, apply SMM in a two-step process:
Step One: Apply fertilizer, other soil amendments and 50% of seed with a small amount of SMM for visual metering.
Step Two: Mix balance of seed and apply SMM at a rate of 50 lbs. per 125 gallons (23 kg / 475 L) of water over freshly seeded surfaces. Confirm loading rates with equipment manufacturer. Do not leave seeded surfaces unprotected, especially if precipitation is imminent.
There are no reviews for this product yet. Be the first.
There are no questions for this product yet. Ask the first.