Why Shop with Us
Customers also Bought:
The Profile ProPlus Tacking Agent 3 is an effective binding agent. It reduces soil erosion and water runoff. This product contains flocculant, hydro-colloid polymers and polyacrylamide. These properties enhance the fiber to soil bond and serves as a marker dye that enhances the visual metering when the tacking agent is being applied. The ProPlus tacking agent 3 exceeds the requirements that are needed for non-asphaltic tacking emulsions. It also increases water holding capacity for all kinds of hydraulic mulches. During heat and stressed conditions, this products assists on germination; making it an effective and convenient product to use for an outdoor area.
|Active Ingredient:||Polyacrylamide, acrylamide copolymer, hydro-colloid polymers, marker dye. pH Range: 7.0 plus or minus 0.2.|
|For use in:||Temporary erosion and sediment control
Earthwork; establishment of subgrade
Erosion and sedimentation control
|Application:||Once your hydraulic seeder is approximately 1/3 full of water add tacking agent 3, seed, fiber muclh and fertilizer to the slurry, please refer to equipment manufacturer's loading instructions
Minimum Application Rate : 30 lb/ac
|Shipping Weight:||50.00 lbs|
|Manufactured By:||Profile Products LLC (Mfg. Number: LF50TACK3)|
Strictly comply with manufacturer's installation instructions and recommendations. Use approved hydro-spraying machines. Do not exceed maximum slope length of 35 feet when slope gradients are steeper than 4 to 1. Install materials at the following application rate:
- Fiber Mulch Binding:
- Mod to 5:1 Slope: 20 pounds per acre.
- 4:1 to 3:1 Slope: 30 pounds per acre.
- 3:1 to 2:1 Slope: 40 pounds per acre.
- Greater than 2 to 1 Slope: 60 pounds per acre.
2. Straw and Hay Mulch Binding:
- 30 pounds Tacking Agent III and 150 pounds cellulose fiber per 1000 gallons of water per acre, or 50 pounds Tacking Agent III per 1000 gallons of water per acre.