Yes, Resolute 4FL needs to be watered in after application.
Depending on the type of turfgrass you are treating and the desired length of control, you will use 0.23 - 1.1 oz of Resolute 4FL Herbicide per 1,000 square feet, per the product label. When using herbicides, it is most important to use the correct amount of product for the area you are treating and to think of the water as a carrier, rather than aiming for a particular rate per gallon of water. You will need first to calculate how much product you need for the type of grass, size area, and desired length of weed control. Then you can calibrate your hose-end sprayer using just water to determine how many gallons of water you need to treat the entire area. Keep in mind that you will need to activate the product with 0.5 in of rainfall or irrigation within 14 days of application.
The shelf life of Resolute 4FL is 3-5 years from the date of purchase as long as it is stored at room temperature.
Resolute 4FL Herbicide is yellow in color and has the potential to stain concrete or other surfaces sprayed. It is recommended that you spray only the areas intended.
Depending on the type of turfgrass you are treating and the desired length of control, you will use 0.23 - 1.1 oz of Resolute 4FL Herbicide per 1,000 square feet, per the product label. When using herbicides, it is most important to use the correct amount of product for the area you are treating and to think of the water as a carrier, rather than aiming for a particular rate per gallon of water. You will need first to calculate how much product you need for the type of grass, size area, and desired length of weed control. Then you can calibrate your hose-end sprayer using just water to determine how many gallons of water you need to treat the entire area. Keep in mind that you will need to activate the product with 0.5 in of rainfall or irrigation within 14 days of application.
Resolute 4FL Herbicide will not kill any existing weeds. It is a pre-emergent, which is only meant to prevent weeds from emerging. It will not harm mature or actively growing desirables.
To avoid turfgrass injury, do not apply Resolute 4FL Herbicide to turf stressed by conditions such as drought, low fertility, or pest damage per the product label.
Resolute 4FL Herbicide is mixed at 0.5 oz per 1000 sq feet or 21 oz per acre. Please see the product label for complete application instructions.
Yes, Resolute 4FL Herbicide can be tnak mixed with glyphosate herbicides like Roundup as long as the tank mixing instructions on the product labels are followed. Keep in mind that Roundup products are nonselective, so they will kill just about anything they are applied to.
Resolute 4FL Herbicide does not come with a dye included. Turf Mark Blue Dye Spray Indicator can be used for easier and more even coverage during application.
Resolute 4FL Herbicide has Prodiamine as the active ingredient and Tenacity has Mesotrione. Resolute acts only as a pre-emergent where as Tenacity can be both a pre-emergent or a post-emergent. Tenacity recommends tank mixing with a true pre-emergent when used for this application to get better control as it only lasts 30 days a pre.
