Talstar P Professional Insecticide - Questions & Answers

Talstar P, like most other insecticides on the market is non-selective and will kill most insects that come into contact with it. We do have a couple of products that may better fit your needs:

https://www.domyown.com/organocide-3in1-garden-spray-concentrate-p-8933.html

https://www.domyown.com/mavrik-perimeter-p-429.html

 

Yes, Talstar P Professional Insecticide will kill cicada killers. We also recommennd to dust in their holes with Delta Dust. 

Talstar P Professional Insecticide is toxic to aquatic life. We recommend EcoVia around bodies of water. 

Talstar can be applied with a pump sprayer or mist blower only.  

We would not recommend treating the inside of the home with Talstar P for flea control. When used indoors, it is only labeled for a crack and crevice application. We recommend that you treat with the products in our Indoor Flea Kit. Also, please take a few moments to read our guide on How To Get Rid of Fleas for more helpful information. 

Yes, Talstar P Professional Insecticide can be used on ornamental plants and is known for being super gentle.

Talstar P is labeled to treat for termites and lasts for about 5 years in the ground when trenching. A better option for subterranean termites would be non-repellents like Termidor SC or Taurus SC. Termidor and Taurus will last up to 10 years in the soil. Non-repellents work slower but are much more effective when treating a termite colony as they are able to be transferred through the entire colony therefore eventually eliminating the colony. 

Talstar P Professional Insecticide is toxic to beneficial insects as well. The manufacturer recommends to apply when bees are not pollinating. 

Talstar P will kill stinkbugs. You should dilute one ounce of Talstar P per gallon of water. You will use a hand pump sprayer to apply the solution on all door frames, window frames, areas where utilities (cables, pipes, wires) enter into the structure, a band of soil 6 to 10 feet adjacent to the structure, also to a height of 2 to 3 feet on the foundation where pests may be active or may find entrance. As the stink bugs crawl over the treated area, they will receive a lethal dose of the insecticide and usually die within a few hours. You should treat every month starting in August and ending in November for the best results.

Talstar is labeled for mole crickets. Here is what the manufacturer says:
Mole Cricket adults: Achieving acceptable control of adult mole crickets is difficult because preferred grass areas are subject to continuous invasion during the early spring by this extremely active stage. Applications should be made as late in the day as possible and should be watered in with up to 0.5 inches of water immediately after treatment. If the soil is not moist, then it is important to irrigate before application to bring the mole crickets closer to the soil surface where contact with the insecticide will be maximized. Grass areas that receive pressure from adult mole crickets should be treated at peak egg hatch to ensure optimum control of subsequent nymph populations (see below). 

Mole Cricket nymphs: Grass areas that received intense adult mole cricket
pressure in the spring should be treated immediately prior to peak egg hatch. Optimal control is achieved at this time because young nymphs are more susceptible to insecticides and they are located near the soil surface where the insecticide is most concentrated. Control of larger, more damaging, nymphs later in the year may require both higher application rates and more frequent applications to maintain acceptable control. Applications should be made as late in the day as possible and should be watered in with up to 0.5 inches of water immediately after treatment. If the soil is not moist, then it is important to irrigate before application to bring the mole crickets closer to the soil surface where contact with the insecticide will be maximized.

If you are spraying porous surfaces you would want to choose a product such as Demon WP. It will stay on the surface of porous areas allowing insects to come in contact with it a bit better. That being said, Demon WP also leaves a white powdery residue that is visible on dark surfaces. Talstar P is a concentrated liquid that is odorless, dries clear and is labeled for a huge variety of insects and areas making it a bit more versatile. If you need to spray plants, trees and siding Talstar P would be a great choice.

For control of larger roaches outdoors, you will usually see best results using a granule bait for the insects applied in areas such as under decks and porches and around landscaping. Niban Granular Bait is a great option for this application.

No, Talstar P Professional Insecticide cannot be used to treat for insects around boats or over areas of water such as lakes, rivers, ponds, etc. Unfortunately, there aren't any insecticides that can be sprayed directly to the outside surface of the boat, as any ingredients they contain could possibly harm the finish on the boat itself. If you have a boat dock, you can spray it with Essentria IC3 which is safe for aquatic life and would be the closest water safe product to Talstar, and covers the same range of insects. Inside the boat itself you can use an aerosol like D-Force to treat crevices and areas under/around seats and places insects tend to hide. 

Talstar P Professional Insecticide is a water-based chemical and will not cause corrosion to stainless steel or galvanized metal. Keep in mind that you should not apply this product directly to food, feed, water, or sources for food or water. You also cannot apply this in a way that would contact the animals or their food or water. Keep in mind that a good fly control program includes the use of multiple control measures such as baits and traps, in addition to insecticides.

Talstar P cannot be used directly on vegetables or fruits that are going to be consumed. We do carry several products that can be used on cucumbers and other edible vegetation such as Sevin and Hi-Yield Indoor/Outdoor 10%. Always read the product label of the product you select to make sure it is labeled for the plant you want to spray and for the pest you are trying to eliminate. The product labels are available for each product on our site and you can see the links for them on each individual product page.

Talstar P is labeled for many beetles but not specifically for the long horned beetle.  However, after doing some research we have found many sites and government studies that list Talstar P as a form of treatment for the long horned beetle.

Talstar P is not labeled for general mites, though mange mites typically are on livestock or pets.  For mange mites, we recommend Tengard SFR which could be used to treat the ground outside, as well as inside the home over a certain area.  Tengard SFR can also be used on a dogs and other livestock (do not use on felines) to kill mites without harming the animal.

Talstar would not be tbe best choice for fleas.  Talstar is a great product for almost any other insect and can be used indoors and outdoors safely.  However, for treatment of fleas the talstar does not have an IGR (insect growth regulator) which is important for the treatment of fleas.  We suggest one of our best selling products for fleas called Ultracide.  It is a product made only for the treatment of fleas and has both an adulticide and an IGR for the treatment of maturing fleas.  It should work great in your garage.  You should treat every 14 days until the problem is gone. 

We would recommend our most popular insecticide, Talstar.  It is a very safe product to use around children and pets and is widely used by professional companies every day in thousands of homes across the country.  It is odorless, can be used indoors and outdoors and it is labeled for over 80 different insects.  You would apply it using a one gallon hand pump sprayer. 

You can eat the fruit as long as the tree is not sprayed and the soil around the tree is not sprayed. Keep Talstar P out of the trees root zone.