Trimec 992 Broadleaf Herbicide is formulated for the professional with a little more 2,4-D to rapidly give you results you can see, like very fast dandelion curl, while keeping your overall costs of application low. Trimec 992 Broadleaf Herbicide is what you need for control of broadleaf weeds in commercial, residential, and institutional settings on both cold and warm season grass like fescue, Kentucky bluegrass, perennial ryegrass, zoysiagrass, bermudagrass, and St. Augustinegrass (do not use on Floratam).
Trimec 992 Broadleaf Herbicide is a versatile product that works with virtually all spray equipment and can be tank mixed with iron, PGRs, or fertilizers (see label for complete details).
|Active Ingredient:||Dimethylamine salt of 2,4-dichlorophenoxyacetic acid - 30.56% Dimethylamine salt of (+)-(R)-2-(2 methyl-4-chlorophenoxy) propionic acid - 8.17% Dimethylamine salt of dicamba: 3,6-dichloro-o-anisic acid - 2.77%|
|Target pests:||Controls Dandelion, Clover, Knotweed, Henbit, Chickweed, Plantain, Spurge and many other broadleaf weeds. See label for complete list.|
|For use in:||Residential, institutional and commercial lawns, sports turf, parks and recreation areas, condominiums and townhouse grounds; also labeled for use on golf course fairways, sod farms and other sites. See label for complete list.|
|Pet safe:||Yes, when used as directed.|
|Yield:||5 to 220 gpa|
|NOT FOR SALE TO:||WA|
|Manufactured By:||PBI Gordon Corporation (UPC: 070251992263)|
A cost effective choice for control of a wide range of broadleaf weeds.
See all 5 reviews »
6 of 7 people found this review helpful:
Weeds Were Taking Over
By Natalie on March 2, 2013
Drought conditions continue in Central Texas, which has taken a toll on my once beautiful St. Augustine grass. Each year more and more weeds have popped up to the point that I was afraid that the St. Augustine had been choked completely out. The types of weeds were also of a variety ranging from the usual dandelions with and without thorns to all kinds of creeping ones like chickweed and hen pen. I had to find something that actually worked so I relied upon some advise from our local county extension agent. He highly recommended a post-emergient called Trimec. With some hesitation, I ordered Trimec. It's been two weeks since I applied it to my entire yard and it is very evident that Trimec works!
2 of 2 people found this review helpful:
By Dwaine on April 19, 2013
Absolutely knocked the weeds down..!! This product lived up to my expectations and more. Weeds that EndRun had little affect on, felt the power of 992 within hours after application. *** If you have tough weeds in your yard, Trimec 992 will solve your problem in one application.
June 25, 2013
I'm in Southern California and have Bermuda grass with that devil oxalis weed since buying the house in '94. Had not been able to kill it off with anything until now with Trimec 992. Husband and I applied it with the hose end sprayer also ordered from here. Immediate results! It did not harm the lawn. Will be putting down a second application this weekend and spot treating thereafter - if necessary, but doubt it will be needed. You can do a second application in 3 weeks. We are SO thrilled with this stuff - it is well worth the money. You will not be disappointed. Be advised it is a very strong pro formula. Would suggest wearing a mask to cover nose and mouth so you're not getting the fumes during application.
0 of 1 people found this review helpful:
August 9, 2013
I shop very smart and if I bought this item from this store, trust me I did the leg work for you.
August 15, 2013
Bought this for controling Creeping Charlie. Works great and didn't affect any grass, just the ugly broadleaf mess that I had.
Have a question about this product?
Ask our product experts...
Ask a Question
August 5, 2013Bob from Eminence, Mo. asked:
QTwo questions. I need a good broad-spectrum herbicide to spot spray 15 acres with a 25 ga. sprayer.
My field is mostly tall fescue. Lots of various weeds - tall and short. 'Was looking at Trimec 992, but wasn't sure. Also could not figure out mix ratio, product per 25 ga. water. Have alot to do, so economy is an issue, too. And would a surfactant help what ever product you recommend? Alot of info, I know, but thanks....
ATrimec 992 would be a good general use broadleaf weed herbicide. You will need to use up to 4.0 pints per acre. When dealing with herbicides the amount of water you use isn't very important as water just acts the carrier. You just need to make sure you are getting the correct amount of product over the recommended amount of space. We would recommend using 1.5 fl oz of Trimec in 1 gallon of water over 1,000 sq ft to help make the application a little easier to figure out. Trimec 992 does not require you to add a surfactant.
April 17, 2013Matt from Easley, Sc asked:
QCan Trimec be stored to use this season and next season, or does it lose its potency?
AYou can store the concentrate in its original container as long as you keep it out of direct sunlight and out of extreme temperatures. You cannot store any product after it has been diluted with water.
May 2, 2013Blake from Boston Ma asked:
QHow long do I have to wait after applying Trimec 992 before seeding?
i was wondering if i buy this, how long do i have to wait to seed the treated areas
AAreas treated with Trimec 992 can be reseeded after 4 weeks.
April 29, 2013Tom from Leavenworth,ks asked:
QWhat is the mixture of Trimec 992 to spray directly on dandelions?
AThe mixture ratio of Trimec 992 really depends on what type of grass your are treating in. For spot treatments you would apply at a rate of 1.5 fl. oz. per 1,000 sq. ft.
October 21, 2013Christopher from Kearny, Nj asked:
QWhat is the mix ratio of Trimec 992 for spot spraying with a backpack sprayer?
May 6, 2013Jim from Maxxium1279@gmail.com asked:
QWhat liquid fertilizers are compatible to be applied with Trimec 992? I am looking for cost effective options.
I purchased a jug of Trimec 992 from you last week, and after reading the label info, I saw that it can be applied with compatible liquid fertilizers. I have a large 2 acre lawn (3 acre lot) and would like to apply the herbicide with an effective, low cost fertilizer at the same time. Thank you!
AOur Coron-18-3-6 is an effective fertilizer and is compatible with most herbicides, fungicides and insecticides. The coverage of the Coron is roughly 22 ounces per 1000 sq/ft, but the exact dilution will vary by lawn type. You can refer to the product label for more specific usage recommendations and for compatibility you can check with the manufacturers of Coron and Trimec 992. Coron is made by Helena Chemical: 1-901-761-0050 and Trimec 992 is made by PBI Gordon: 1-800-821-7925.
May 11, 2013Jim from Janesville, Wi asked:
QCan Trimec 992 be used in horse pastures?
A Trimec 992 Broadleaf Herbicide is not labeled for that use. We recommend contacting PBI Gordon Corporation. 800-821-7925. To advise if you can safely use this product in pasture.
Trimec 992 Broadleaf Herbicide is not labeled for that use. We recommend contacting PBI Gordon Corporation. 800-821-7925.
To advise if you can safely use this product in pasture.
June 26, 2013Fred from Maine asked:
QCan Trimec 992 be mixed with Roundup Quick Pro?
ABoth Trimec 992 Broadleaf Herbicide and Roundup have different molecular makeups and are labeled for different treatments. please contact the manufacturer PBI Gordon Corporation 800-821-7925 of Trimec 992 to ensure it will not counteract the Roundup.
May 3, 2013Anthony from Houtzdale, Pa asked:
QDo you have a product that is comparable to Lesco three-way?
AWe are not familiar with the Lesco Three way brand to be able to accurately compare one of our products to it. However, you may be interested in our Trimec 992 Broadleaf Herbicide. If you can provide the ingredients used in the Lesco and the type of product it is, i may better be able to answer your question.
May 16, 2013Paul from Dayton, Ohio asked:
QTrimec 992 or EndRun?
Hello. I thought I asked this a few hours ago, but I don't think it got sent. I just bought a house with a big yard (10,500 sq ft front, 7,500 back). Both yards have tons of weeds, many of which I can't even identify. There are dandelions, plantain, thistles and clovers, plus many creeping weeds that I'm not familiar with. Some have flowers: purple, white & yellow. I've tried Weed-B-Gone and Anime 2,4-D. After a month, some dandelions are wilted but the rest are barely phased. So I'm looking at Trimec 992 and EndRun but don't know which one to get. I can't afford both. Which would be best for my problem? Or is there another product you'd recommend? And what would be the mixing ratio of oz to gallon for spot-treating lawns? I read their labels and it's not addressed. Thank you very much!
ABoth Trimec 992 Broadleaf Herbicide and EndRun are terrific Post emergent herbicides.
Since some of the weeds are not identified, we recommend contacting the local extension office and speaking with the master gardener. The master gardener wil be able to help identify and suggest specific products that work well in your area.
May 20, 2013Greg from Rochester Mn asked:
Qwhat is the mixture ratio to use in a 25 gallon sprayer?
AThere is not going to be an exact mixture ratio for that amount of water. When spraying an herbicide, the amount of water is not what is key. You need to make sure you are getting the correct amount of product over the correct amount of area. You will need to refer to the product label for how much you should be using for your type of lawn as is varies from one turf to the next. If the label states to use 1.2 ounces per 1000 sq/ft then you need to use the 1.2 ounces, in however much water it takes you to cover that much area. If doing a side by side comparison, the speed at which you are moving and we would be moving to treat 1000 sq/ft will most likely be different. It may take you only 2 gallons of water to cover the area being treated, and it may take us 5 gallons. Both are correct and both of us would mix the 1.2 ounces in with the water. If you have any further questions please let us know.
April 8, 2013Kaitlyn from Oklahoma City Oklahoma asked:
QWhere can I find mixing directions for Trimec 992?
where can i find mixing directions for this product?
AHere is a link to the product label: Trimec 992 Product Label. You should note that the product label instructions are available on every product page in the gray description box below the picture of the product. (On the same page you submitted this question)