• Please Note: If you have questions about an order you placed, shipping policies, product availability or product returns, please do not use this form. Direct these questions to our customer support center or by calling 866-581-7378.

    Most product questions are answered within 24 hours.
    Not all questions and answers will appear on our website. Thank you for choosing DoMyOwnPestControl.com!
  • * (limit 110 characters)
  • (optional)
  • *
  • *
  •   (city, state)
  •     Cancel

Q&A Home

Rodney from Royal Palm Beach, Fl writes,

What are the mixing recommendations for Celsius WG?

I have a ortho dail N spary hose end sparyer that is 32oz how much should i mix in for a 1/8 of an acre with the sprayer dial at 1oz to a 2oz ratio


This product will not work well in a hose end sprayer because those sprayers are not accurate enough to apply the correct amount of product. You will need to use a hand pump sprayer and uniformly spray the product over the specified area.As with most herbicides the exact volume of water is not very important, you just need to be sure you are getting the correct amount of product on a specific area. Celsius may be applied at three different rates depending on the weeds to be controlled. For the appropriate rate and species consult USE RATES FOR WEED CONTROL section on the Celsius product label. For spot applications, add the specified product rate of 0.057-0.113 oz (1.6-3.2g) to enough water to create approximately 1 gallon spray solution. One gallon of spray solution will treat up to 1,000 sq ft. For maximum weed control with broadcast applications, add non-ionic surfactant.

Answer last updated on: 02/08/2013

10 of 14 people found this answer helpful. Was it helpful to you?   Yes No