• Please Note: If you have questions about an order you placed, shipping policies, product availability or product returns, please do not use this form. Direct these questions to our customer support center or by calling 866-581-7378.

    Most product questions are answered within 24 hours.
    Not all questions and answers will appear on our website. Thank you for choosing DoMyOwnPestControl.com!
  •  
  • * (limit 110 characters)
  • (optional)
  • *
  • *
  •   (city, state)
  •     Cancel

Q&A Home

Randell from Columbus, Ohio writes,
04/13/2015:

What do you mean by attaching a "Hose end"?

I do not understand what you mean by attaching a "Hose End" what Hose end and where do I get this hose end? Thank You Randell

Answer:

The Bayer Advanced Crabgrass Killer for Lawns RTS is meant to be attached to the end of a water hose. Screw your garden hose into the water spicket on the house and at the end of the honse, is a metal threaded piece. This screws into the plastic opening on the Bayer Advanced Crabgrass Killer for Lawns RTS. 

CONNECT: 1. Shake well before use. 2. Connect sprayer to garden hose. 3. Turn on water.

SPRAY 1. Extend hose to farthest area to be treated, point sprayer nozzle in direction to be sprayed. 2. Begin spraying – Press lock tab while using other hand to turn sprayer valve to ON position. 3. Walk at a steady pace while spraying, using an even sweeping motion, and slightly overlap the treated areas. Work back toward the faucet to avoid walking over wet, treated grass.

FINISH 1. To stop spraying, Press lock tab while using other hand to turn sprayer valve to OFF position. 2. Turn of water at faucet. 3. Relieve water pressure in hose by turning sprayer valve back to ON position until water slows to a drip then turn sprayer valve to OFF position. 4. Disconnect sprayer from hose

Answer last updated on: 04/13/2015

1 of 1 people found this answer helpful. Was it helpful to you?   Yes No