• Please Note: If you have questions about an order you placed, shipping policies, product availability or product returns, please do not use this form. Direct these questions to our customer support center or by calling 866-581-7378.

    Most product questions are answered within 24 hours.
    Not all questions and answers will appear on our website. Thank you for choosing DoMyOwnPestControl.com!
  • * (limit 110 characters)
  • (optional)
  • *
  • *
  •   (city, state)
  •     Cancel

Q&A Home

Bud from Thomasville, Nc 27360 writes,

What setting should I use for my hand spreader for Snapshot?


In general you will use 2.3 - 4.6 lbs. per 1000 sq. ft. First you should determine which usage rate is needed for your use by reading the product label.

Here is how to determine what spreader setting is needed for your spreader:

If you need to use 3lbs of product per 1,000 sq ft you would  add 3 lb of product to spreader, start with a medium setting, then apply product to a 20 x 50 ft area (1,000 sq ft).  If you have product left, your setting is too low.  If you run out of product, your setting is too high.  Typically if you walk at a normal pace and set the spreader at the middle setting, that is usually the right amount per 1000 square feet.

Answer last updated on: 03/31/2013

1 of 1 people found this answer helpful. Was it helpful to you?   Yes No