Price/Ea.
$93.98

Buy 2 or more: $91.55 each

Bundle and Save Offer!
Get Monterey Mark-It Blue 8 oz. with your purchase* for only $5! Must add the Monterey Mark-It Blue 8 oz & at least one qualifying product to the cart. Use Code BLUE5 at checkout.  *See Details

Have a Question? Ask Our Pros!

Email Our Pros
We're here to help
Offline. Leave Us a Message

You May Also Need

Average Rating

4.5 out of 5 stars Rating: 4.6

387 Reviews | 654 Q&A

Product Overview

Bora-Care is a borate-based product that provides prevention and control of Termites, Carpenter Ants, Powderpost Beetles and Decay Fungi. Bora-Care can be used on all cellulosic materials including wood, plywood, particle board, paper, oriented strand board (OSB), cardboard, and wood composite structural components, as well as concrete, block, brick, metals, PVC plumbing pipes and other non-cellulosic materials not intended for food contact. Apply Bora-Care solutions only to bare surfaces where an intact water-repellent barrier, such as paint, stain or sealer is not present. If you are looking to kill and prevent mold, please see Bora-Care with Mold-Care. Also, a dye can be added to the Bora-Care solution when treating studs or wood inside wall voids called Turf Mark Blue. Bora-Care will dry clear and will not change the color of your wood.  

Bora-Care cannot be applied to any live trees or plants.

Features and Specs

Active Ingredient Boron sodium oxide (B8Na2O13), tetrahydrate (12280-03-4) 40%
Target pests Wood Destroying Fungus, Termite Control and wood-destroying insects such as termites, carpenter ants, powderpost beetles, etc.
Application For powder post beetles, Bora-Care must be used on untreated wood. It is preferred over other treatments such as timbor in treating furniture because Bora-Care dries clear and will leave the furniture in its natural state. It will also absorb much further into the wood so you know the infestation is treated. Bora-Care is diluted with water at a 1:1 - 5:1 ratio depending on the pest you are targeting.
Yield One gallon of Bora-Care will treat approximately 100 lineal feet of 2 x 4 stud wall. This includes sill plate and header. For other dimensional lumber, logs, or siding and plywood, please see the product label to the right. Typically, one gallon of concentrate Bora-Care will treat 800 square feet of a 2x4 stud wall, and 500 square feet of a crawl space or attic.
NOT FOR SALE TO NY (Restricted to Licensed Applicators Only)
Coverage Area Post construction and active infestations use rate is 1:1
Preventative use rate is 1:1, 2:1, 3:1, or 5:1 Refer to the label for complete instructions.
Shipping Weight 11.85 lbs
Manufacturer Nisus (Mfg. Number: PRO-BORACARE4X1)
UPC 616609111025
EPA Registration 64405-1

Details

How Bora-Care Works

Bora-Care contains an inorganic borate salt, soluble in water, with insecticidal and fungicidal properties effective against wood destroying organisms. A patented carrier system allows Bora-Care’s active ingredient to diffuse into wood. This system makes Bora-Care more effective than products designed to treat only the wood’s surface. It is particularly suited for seasoned or kiln dried wood.

Bora-Care provides double protection by acting as both a toxicant via ingestion and a deterrent to termite tubing. This means that termites are kept out of structures, preventing wood damage. When termites or other wood-destroying insects ingest Bora-Care, the borate active ingredient poisons the microorganisms in the insects’ digestive tracks that are needed to break down the cellulose in the wood. Essentially, it causes the insects to starve to death. Insects have shown no ability to develop resistance to borates.

Bora-Care Target Pests

Wood destroying fungus, termites, carpenter ants, wood-destroying beetles such as powder post beetles

Pests Controlled With Bora-Care: Subterranean Termites (Reticulitermes, Heterotermes), Formosan Termites (Coptotermes), Drywood Termites (Kalotermes, Incisitermes), Dampwood Termites (Zootermopsis, Neotermes), Powderpost Beetles (Lyctidae, Bostrichidae), Anobiid Beetles (Anobiidae), Old House Borers, Longhorn Beetles (Cerambycidae, Hylotrupes), Ambrosia Beetles (Platypodidae, Scolytidae), Carpenter Ants (Camponotus), Decay Fungi (Rot), Brown Rot (including dry rot), White Rot, Wood Decay, Algae

Target Uses of Bora Care

Bora-Care provides prevention and control of Termites, Carpenter Ants, Powderpost Beetles and Decay Fungi. Bora-Care can be used on all cellulosic materials including wood, plywood, particle board, paper, oriented strand board (OSB), cardboard, and wood composite structural components. Since Bora-Care is applied directly to the wood, it can be used in areas where environmental contamination is of concern. The active ingredient in Bora-Care is an inorganic salt and once in place will not decompose or volatilize out of the wood. Treatment is long lasting as long as the treated material is not exposed to rain, continuous water or ground contact.

Bora-Care is most frequently used for pre-construction or post-construction preventative treatment of listed wood-infesting pests on structures. Bora-Care can also be used for remedial treatment of active infestations, such as in attics for treatment of drywood termites. Bora-Care can also be used to treat wooden items like interior trims or furniture, provided there is no stain, paint, or similar finish on the items. In addition to cellulosic materials, Bora-Care also can be used on concrete to prevent termite tubing.

ACTIVE INGREDIENT: Disodium Octaborate Tetrahydrate (Borate) 40%

How to Apply Bora-Care

Bora-Care can be sprayed, brushed or foamed onto bare wood surfaces and voids. The product cannot be fogged. Wood treated with Bora-Care will appear darker than normal for a few days until the chemical dries in. Bora-Care will not affect the paint or staining of the wood. Wood treated with Bora-Care is non-toxic to humans and animals. Bora-Care must be diluted with hot water in a bucket and then added to your sprayer. Failure to pre-mix in a bucket will cause your sprayer to clog.

Mixing – The use of an impeller-type mixer that can be used with an electric drill aids the dilution process. Always mix in a separate container then add the solution to a spray tank. Use 1:1, 2:1, and 3:1 solutions within 24 hours after mixing. 5:1 solutions will remain stable for up to 30 days. Do not leave unused solution under pressure or in tank overnight.

*Always read the product label completely before use.

YIELD:

The yield of Bora-Care varies greatly depending on use and total volume of wood to be treated (not just surface area). Typically, one gallon of concentrate at a 1:1 ratio will treat 800 square feet of a 2x4 stud wall or 500 square feet of a crawl space or attic. On non-cellulosic materials, one gallon of finished solution treats 400 square feet of surface area.

For siding and paneling, one gallon of concentrate at a 1:1 ratio will treat 800 square feet of 1” wood by spraying only one side. If siding or paneling is ½” thick, the same amount of solution treats 1,600 square feet.

*See product label and supplements for charts and worksheets to aid in calculating the amount of Bora-Care needed for your application.

Standard Application Dilution rates / Mixing Ratios for Bora-Care:

*1:1 parts water to Bora-Care – 23% - active infestations, post-construction applications; application to wood more than 4 inches thick for wood-infesting beetles or Fungi or Algae

*2:1 parts water to Bora-Care – 16% - foaming or misting application for termites or carpenter ants; hardwood floors for some wood-infesting beetles

*3:1 parts water to Bora-Care – 13% - remedial control of Fungi and Algae on wood less than 4 inches thick

*5:1 parts water to Bora-Care – 9% - most preventative or pre-construction treatments

See Remedial Injection Bulletin for an easy flow chart of ratios for existing construction treatments.

Bora-Care is for use in the following areas:

Homes, Apartments, Garages, Museums, Public and Private Institutions, Schools, Hotels, Hospitals, Kennels, Stables, Farm Buildings, Trucks, Trailers, Warehouses, Non-Food Areas of Supermarkets, Restaurants and Food Processing Plants

Surfaces: All non-food contact surface cellulosic materials including wood, plywood, particle board, paper, oriented strand board (OSB), cardboard (non-food packaging material), wood composite structural components, concrete, block, brick, metals, PVC plumbing pipes and other non-cellulosic materials found in structures.

Indoors

Use Bora-Care on new construction. For termite pretreatments, simply spray a two-foot tall continuous barrier directly to the wood using a tank sprayer or portable backpack sprayer. This includes the walls, piers, interior slab or basement walls, plumbing penetrations, pipe chases, bath traps, and any other foundation penetrations. Treating this way insures that all termite entry-points are treated. You can also use Bora-Care as a whole-house treatment for general pest protection to prevent infestations of decay fungi and wood destroying pests such as drywood termites and destroying beetles.

Remedial Wood Structure Treatment – Spray and/or inject Bora-Care solution into beetle holes, termite and carpenter ant galleries and decay pockets. Apply 1 coat of solution to the point of surface saturation to all infested and susceptible wood, paying particular attention to infested areas. Apply 2 coats to those wood members with only one or two exposed sides. Wait at least 20 minutes between applications.

Wood Flooring (Remedial Treatment) – Treat by spray, brush or roller application. Prior to application, remove any existing finish by complete coarse sanding or stripping. Use a 2:1 (water to Bora-Care) solution at a rate of approximately one gallon of solution per 500 square feet of floor surface. Two coats may be required for termite infestations, waiting at least 1 hour between applications. Moisture content must be 10% or less before applying final finish.

*Bora-Care may be applied by misting or foaming at high expansion rates into inaccessible wall voids, wall studs, and wood members. (Bora-Care cannot be used in fogging machines.) See product label for complete details.

Preventative treatment – For framed wood surfaces above ground, apply a 1:1 solution. Treat remainder of structural wood in a 5:1 solution. Concentrate application in areas susceptible to attack, to include all sills, plates, floor joists, piers, girders and subfloors. Treat all exterior wood including siding, facias, soffits, eaves, roofing, porches, decks and railing. If Bora-Care is the sole preventative treatment for subterranean termites, a 1:1 solution must be used.

Buildings on crawl spaces and basements (preventative and pretreatment) – Use a 1:1 solution and apply in a 2 foot uninterrupted band to all structural wood surfaces in crawl spaces and basements. To prevent termite shelter tubes on crawlspace walls, apply to concrete or block walls in a 2 foot band up from the ground on interior wall surfaces. Apply at the rate of one gallon to 400 square feet of surface area.

Please read the label for more instructions.

Outdoors

*Do not use to directly treat soil.

All exterior wood - DO NOT APPLY IN RAIN OR SNOW. Do not expose treated exterior wood surfaces to rain or snow for at least 48 hours after treatment. For longer performance, exterior wood surfaces will require a topcoating with a water-resistant finish such as paint or exterior stain. Apply within 6 weeks of treatment. Bora-Care must dry completely (at least 48 hours) before applying any protective topcoat.

Treatment of exterior wood surfaces less than 2 inches thick, such as decks, sheds and fences – Apply only to bare wood or to wood surfaces where an intact water repellent or finish is not present. Remove paint or finish prior to application. Apply one coat of solution to all wood surfaces. Apply two coats to heavily infested areas and to those surfaces where access is limited to 1 or 2 sides of wood members.

Exterior wood thicker than 2 inches, Logs, timbers, beams, etc. – Use a 1:1 Bora-Care solution to all surfaces. Treat bare wood only. Refer to application charts for specific sizes of logs or beams. Typically, 2 coats are required to treat round logs 10” or greater in diameter and rectangular logs larger than 6” x 12”. Wait at least 1 hour between applications.

When treating around the exterior of structures, cover and protect shrubbery and plants that may be potentially exposed to Bora-Care, since it may be phytotoxic to plants.

Bora-Care Features

*Pretreatments can be done IN ONE TRIP.  No need to worry about weather delays or pumping chemicals into the soil, crews can remain on the job site during treatment, and treatment will last for many years.

*Absorbs all the way into wood for the most complete borate treatment available.

*Dries clear, doesn’t affect future painting or staining of wood surfaces.

*Emits no VOCs (volatile organic compounds).

*Qualifies builders for LEED for Homes points as well as points in many other green building programs.

*Bora-Care is the only borate-based termiticide that is EPA-registered as a primary perimeter termite pretreatment for new construction with its own product-specific field efficacy studies.

*Bora-Care remains for the life of the treated wood, so no retreatments are necessary (provided wood is not exposed to rain, continuous water, or in contact with the ground).

Extra Tips for Using Bora-Care

*Always pre-mix in a separate container before filling spray equipment.

*Use only on raw wood materials. Bora-Care will not penetrate paint, stain, or sealants.

*Older wood boring beetle larvae and especially pupae already present in the wood at the time of treatment may occasionally emerge sometime after treatment.

*If finished surface appearance is a concern, a wood cleaner such as Mold-Clean may be used prior to Bora-Care treatment.

*The rate at which Bora-Care is absorbed varies depending on the thickness of the wood and, particularly, the moisture content of the treated wood. Higher moisture content will allow for more rapid absorption.

* An appropriate dye or colorant such as Turf Mark Blue may be added to the solution when diluting Bora-Care with water to make it easier to see where Bora-Care has been applied.

Storm and Water Damage Steps

STEP 1: Remove all wet and unsalvageable building material from the site.

STEP 2: Completely dry the remaining affected areas.

STEP 3: Spray Bora-Care according to the label application directions on all structural wood and building material, including concrete, block walls, foundation penetrations and sheet rock. Allow to dry before rebuilding.

Under ideal conditions, Bora-Care penetrates wood over a 4-6 week period and remains for the life of the wood.

Protecting Structures From Moisture and Fungi After Flooding Steps

STEP 1: Wear appropriate protective gear and make sure the electricity and HVAC are off.

STEP 2: Begin removing mud, flooded furniture, appliances, carpets, and flooring.

STEP 3: Clean thoroughly and disinfect with an appropriate EPA registered disinfectant, sanitizer and virucide like Nisus DSV.

STEP 4: Cut out sheet rock 2 feet above the highest water line to allow for proper drying.

STEP 5: Open doors and windows to begin circulating fresh air. Use fans and dehumidifiers if available.

STEP 6: Use a moisture meter to determine when wood is 19% or less moisture content.

STEP 7: Treat all exposed wood using Bora-Care with Mold-Care in a 5:1 Solution.

STEP 8: Apply termite protection with a 2 foot band treatment using Bora-Care in a 1:1 solution. Once dry, the home is ready for repair.

Review Search   
Sort Reviews
  • 1 of 5 Stars

    I wouldn't buy this again

    By Doris on 04/27/2010

    Verified Purchase

    I had my home sprayed with this for the wood post beetles and they were gone...until today they came back. For over a week not a single one was sighted. This does work on contact but the reason that I bought this product was because it claimed to kill up to twelve months...I didn't even get twelve days of peace.

    Expert ResponseExpert response:
    Bora-Care is the best wood treatment product on the market.  However, Bora-Care can take up to a month to diffuse completely through the entire piece of wood after you treat it.  Since powderpost beetle larvae can be deep in the wood, it is normal to continue to see activity for awhile until the Bora-Care makes it all the way through the wood.  Of course the true benefit of Bora-Care is that after it does diffuse all of the way through the wood and kill the larvae, it will stay in the wood forever and you never have to worry about wood destroying insects again.

    Was this review helpful to you?  YesNo

    488 of 532 people found this review helpful

  • 5 of 5 Stars

    Bora-Care is the BEST!

    By Michael on 01/11/2010

    Verified Purchase

    I had a termite control company give me an estimate to spot treat my drywood termites and it was astronomical! I found that DoMyOwnPestControl.com had the same product Boracare for a fraction of the cost. I treated my infestation using the recommendations on the website and now I have a termite free home and more money in my pocket!

    Was this review helpful to you?  YesNo

    345 of 356 people found this review helpful

  • 5 of 5 Stars

    Easy to mix and use, and I don't get sick

    By Larry on 06/08/2010

    Verified Purchase

    I have used half a gallon for remediation of dry wood termites on fascia boards by using 1:1 and 1:2 dilutions applied to bare wood and by injecting in drilled holes where the wood is covered by paint. I like this product as well as the Bifen IT, as they are fairly non-toxic to people and animals. I can use both of them extensively without feeling ill effects myself. I added Bifen IT to the Boracare solution to get a 0.12% Bifen IT concentration (double strength). The Bifen IT works as an quick termiticide and the Boracare provides long term protection. Now that I have stopped the active infestations, I can take my time and protect the rest of my house's fascia, rafter and joist board ends with simply painting a 1:5 Boracare dilution on the ends of the boards (where dry wood termites enter). I will need a 2nd gallon of Boracare to protect the entire house and will be ordering soon. For approximately $200 of products from Domyownpestcontrol, I will have done the remediation work and the whole house protection. This has been a lot of work, but I have saved many thousands of dollars, plus I can take my time and know that the job is done right.

    Was this review helpful to you?  YesNo

    262 of 271 people found this review helpful

  • 4 of 5 Stars

    BoraCare user review

    By Kevin on 05/08/2010

    Verified Purchase

    Used product on wall studs, when I was repairing a wall due to termite damage. My project lasted about three days. I used a 1:1 mix and I did not pay too much attention to the one day usage. The product crystalized in my sprayer - took awhile to clean the sprayer.

    Was this review helpful to you?  YesNo

    142 of 158 people found this review helpful

  • 5 of 5 Stars

    Bora-Care Product Review

    By Patrick on 04/29/2010

    Verified Purchase

    I don't know why the wood adjacent to my bath tub wet wall was moist?  There were no leaks and the plumbing vent to the roof was well sealed.  Condensation?  The bath drainpipe and water inlets come up through a hole in the slab. The subterranean termite varmints tunneled 10' or 40' under the house slab and surfaced at this point of exposed earth attracted by the moist wood. They swarmed the first warm days in Spring. I treated the exposed earth area with the Dominion 2L termiticide and then filled it with sand. I treated the slab, wood framing, floor and molding with a 2:1 mixture of BoraCare. I sprayed BoraCare down from the attic and drilled holes in the walls where there was no other access. I will finish by treating the ground around the house with Dominion 2L. My problem appears to be solved for under $200. Thanks DoMyOwnPestControl.com!

    Was this review helpful to you?  YesNo

    137 of 145 people found this review helpful

See all 387 customer reviews

Questions & Answers

Have a question about this product?
     clear search

Search results for "hardened"

Q
After treating with Bora Care can I use a wood hardener?

I removed dry rot and loose wood on a garaged door and will treat with Bora Care. After the BC has cured, can I treat the wood with Elmer's 16-oz. Rotted Wood Stabilizer? The area will then be filled in with bondo and painted.

A
Since Borates from Boracare will be evenly distributed throughout the wood, applying wood hardener to the areas that were effected by rot will not have any adverse effects.

Was this answer helpful to you?  YesNo

17 of 18 people found this answer helpful

Q
How long should I wait to apply wood hardeners after treating with Bora-Care?
A

You should apply Boracare to raw wood. You can then apply any stain, sealant, or paint after the Boracare application has dried, usually 24-48 hours.  

Was this answer helpful to you?  YesNo

1 of 1 people found this answer helpful

Q
The Boracare has gelled in the jug and will not pour easily; how do I re-liquify it?
A
The consistency of Boracare is very thick. We do recommend that you mix it in a bucket first with very hot water before putting it into a sprayer. If you have any additional questions, please let us know.

Was this answer helpful to you?  YesNo

0 of 3 people found this answer helpful

Q
How do I know if Bora-Care penetrated properly if it is still sticky after more than 24 hours?

I have an ash dining table that has powder post beetles in one on the breadboards. Since it was already finished I sanded off the stain and poly from the underside of the whole table and applied Bora-Care (1:1) with a brush. It didn't seem to dry properly in my cool basement and stayed sticky. I read somewhere else about wiping off any residue which I did and applied a second coat (about 3:1). The same thing happened. I'm still seeing signs of activity and a couple live beetles but I guess this is normal?? I'm wanting to make sure the product penetrated the wood and didn't just sit on the surface.

A

We would recommend giving the Bora-Care at least 24 to 48 hours to dry completely. Factors that could prevent the Boracare from drying complete within that time frame include applying to finished or treated wood, failing to mix the product completely before application, mixing too much Boracare concentrate for the amount of water (less than 1:1 dilution), or extreme weather conditions such as a very cold or humid environment. If the wood is very old and the moisture content is very low, that would also prevent the Boracare from absorbing as quickly or easily. If you applied the Boracare to raw wood surfaces, then it should eventually dry. It is common to continue to see some beetle activity after Boracare application since the Boracare cannot completely prevent dormant beetles from emerging. If you still have concerns about the texture after several days, you can also give Nisus (the manufacturer) a call for assistance at 800-264-0870.

Was this answer helpful to you?  YesNo

5 of 5 people found this answer helpful

Items 1 - 4 (of 4 Total)

Bora-Care 4.5 out of 5 stars Rating: 4.6 (387 Reviews / 654 Q&A)

From $93.98 + Free Shipping*