Product Q&A

« See More Q&A's

Mala from Ar writes

Could you please explain the installation instructions for the Impressions Willow Rain 65 Gallon Rain Saver barrel?

Answer:

The instructions for installing the Impressions Willow 65 Gallon Rain Saver barrel are as follows: NOTE: If your rain barrel comes with a spigot pre-installed, skip to step 3. 1) Remove the screen with a screw driver. Locate the hardware kit inside (brass spigot and plumber's tape). Reattach screen 2) Wrap the tape aroung the threaded end of the spigot in a counterclockwise direction. 3) Select an apprpriate house downspout for use. 4) If you are using a rain diverter, go to step 6,. Position the barrel next to the downspout. If your barrel will be on a stand or somehow elevated, be sure that it is raised to its final assembled height before step 5. 5) Mark a point on the downspout 4" (101mm) about the screen. 6) Carefully cut your downspout at your mark or according to rain diverter instructions. Move the base back against the wall, keeping it level or slightly pitched forward. 7) Enjoy pure fresh rain water! I have also attached the Installation and Usage Instructions here as well.  

Answer last updated on: 07/08/2016

Was this answer helpful to you? Yes No

3 of 4 people found this answer helpful.