• Please Note: If you have questions about an order you placed, shipping policies, product availability or product returns, please do not use this form. Direct these questions to our customer support center or by calling 866-581-7378.

    Most product questions are answered within 24 hours.
    Not all questions and answers will appear on our website. Thank you for choosing DoMyOwn.com!
  • * (limit 110 characters)
  • (optional)
  • *
  • *
  •   (city, state)
  •     Cancel

Q&A Home

Marilyn from Lakeland, Tn writes,

I have used the 1.47% imidacloprid as a drench for trees and shrubs with success for 3 yrs.

I see that you have Dominion which is 21.4% conc. of imidacloprid. Can this be diluted to the 1.47% for safe drench for trees and shrubs. If so, what is the dilution rate and wouldn't this be more cost efficient for me.


Dominion 2L would be mixed following the instructions on the product label.   You should use 0.10.2 fl. oz. (3 to 6 mL) of Dominion 2L per inch of trunk diameter (or foot of shrub height) (D.B.H.) diluted in 1 pint - 1 gallon of water per inch of trunk diameter or foot of shrub height.  You would not be able to dilute to a 1.47% as it is a stronger product and the percentage of active is different when diluted.

Answer last updated on: 04/20/2015

0 of 1 people found this answer helpful. Was it helpful to you?   Yes No