• Please Note: If you have questions about an order you placed, shipping policies, product availability or product returns, please do not use this form. Direct these questions to our customer support center or by calling 866-581-7378.

    Most product questions are answered within 24 hours.
    Not all questions and answers will appear on our website. Thank you for choosing DoMyOwn.com!
  • * (limit 110 characters)
  • (optional)
  • *
  • *
  •   (city, state)
  •     Cancel

Q&A Home

Kisa writes,

How far do you drill the holes from your house when doing a termite treatment?

I do not have a basement or termites but my neighbors house has a terrible termite problem.. We just want to prevent damage to our own house. How far away from the house do i drill the holes? How deep do i drill the holes? and is it 2.4 ounces of Dominion 2L for every 4 gallons of water?


All of the instructions on drilling holes through slabs and drilling trenches are described in our "How To Do A Termite Treatment" article on our Termite Control Page.  When using Dominion 2L, you should mix .6 ounces per gallon of water, or 2.4 oz. per 4 gallons of water.  Four gallons of solutions should be applied every 10 lineal feet in the trench and through the drill holes over 10 feet.

Answer last updated on: 07/21/2011

3 of 3 people found this answer helpful. Was it helpful to you?   Yes No