• Please Note: If you have questions about an order you placed, shipping policies, product availability or product returns, please do not use this form. Direct these questions to our customer support center or by calling 866-581-7378.

    Most product questions are answered within 24 hours.
    Not all questions and answers will appear on our website. Thank you for choosing DoMyOwn.com!
  • * (limit 110 characters)
  • (optional)
  • *
  • *
  •   (city, state)
  •     Cancel

Q&A Home

Mike from Chester, Nj writes,

Just to clarify, is the suggested application rate after dilution of CAL FLO Liquid Limestone?


Below is the dilution for both commercial and residential use.

Using commercial spray equipment, fill dilution tank half full with water and start agitation. Add the correct amount of CAL FLO Liquid Limestone and finish filling the mixing tank. Suggested dilution rate for general use is 30 gallons of water to one gallon of CAL FLO Liquid Limestone depending upon the type of equipment being used. CAL FLO Liquid Limestone is well suited for hydro seeders, greenhouse irrigation systems, and boom sprayers.

For home lawn and garden spray equipment, add one cup of CAL FLO Liquid Limestone to 2 gallons of water. Shake mixture in a hand-held tank or backpack tank before spraying.

A general application rate for diluted spray is one gallon to 600 square feet for instant pH adjustment. For prolonged pH maintenance reapply CAL FLO every 8 to 12 weeks.


Please refer to the product label for full application instructions. Please let us know if you need anything else.

Answer last updated on: 07/21/2014

7 of 8 people found this answer helpful. Was it helpful to you?   Yes No